Product Main

Specifications

Offer plastic mold making for various parts, hot runner system plastic mold making ,rapid pastic mold making MUD plastic mold making, large and precise plastic mold making, support product design and prototype, DFM analysis, mold flow & warp analysis before plastic mold design more than 12 years plastic mold making for global market .

Detail export plastic mold specification:
1, All molds construction can be SPI Class 101/102/103 refer to customers' request

2, Mold base can be DME, HASCO or LKM, customized mold base are avaiable.  Mold base steel can be S50C(1050/1.1730), P20, 420ss or the other steel. MUD mold base are available.

3, All tapped holes will be American National Standard(AISI) or Metric refer to different location of customer or customers' request.

4,Guided ejection is default configuration, specification refer to DME, HASCO, or LKM standard, customized are available.

5, Ejection rods locate as per customers' injection machine specification or provided data. Tapped holes and clerance refer to customers' injection machine specification or provided data.

6, Ejection pin is DME, HASCO, DAIDO or equivalent standard, customized stand are available.
7, Water connector is DME, HASCO or customized standard, also there are lots of local water standard are available.
8,  Lifting holes is UNC or metric.
9, Sprue bushing will be DME, HASCO or LKM standard, custom are available.
10, Hot runner system can be INCOE, YODU, HUSKY, HASCO, DME, MoldMaster, Synventive or the others
11, Runner shut off will be used for family molds
12, Thermocouples and probe temperature needle are available
13, Side lock will be default configuration
14, Latch lock will be DME or HASCO standard

15, Mold steel can be 718(h), 738(h), S136(h), S7 from ASSAB of Sweden, NAK55 and NAK80 from DAIDO of Japan and P20(FINKL ), P20HH(FINKL), DRX(FINKL), 420, 2311, 2312, 2344, 2767 from LKM etc.