Introduction

 

MT Series slewing ring bearings have a rectangular cross-section and range in 

size from 4 to 47 inches OD (100 to1200 mm). They provide optimal economy and capacity for a given envelope dimension.

 

Design Features

 

The internal configuration consists of deep groove gothic arch raceways and 

maximum ball complement. This results in a four-point contact design which 

provides exceptional moment, thrust, and radial load capacities. Integral face 

riding seals for the larger sizes and non-contact shields for the smaller assist in the exclusion of contaminants. These features make them an ideal choice for a wide range of applications from light to heavy duty.

 

MT Series bearings are offered in non-geared (MTO) and externally geared 

(MTE) configurations. The gears are Fellows Stub Involute up to the MTE-324 

size and Stub Involute for larger sizes, all manufactured to AGMA Class Q6 

quality. Contact Kaydon for tooth backlash allowance.

 

Part numbers ending in a T suffix have threaded mounting holes.  Thread 

depths are a minimum of 1.5 times the nominal hole size diameter indicated.

Part numbers ending in an "X" suffix provide additional load capacity.

 

Availability
 

MT Series bearings are generally available from stock, and mating pinions for the geared versions through MTE-705 are also generally available. 

 

Applications
 

MT Series bearings have been used successfully in a wide range of 

applications from light to heavy duty.

The smaller sizes are well suited for:

© Manipulators

© Jib cranes

© Lift-assist devices

© Work positioners

© Larger sizes are well suited for:

© Truck-mounted cranes

© Aerial lifts

© Hoists

© Small wind turbines

© Non-precision positioning tables

Main items :
MTO 050,MTO 065,MTO 143T,MTO 145T,MTO 210T,MTO 265T,MTO 415T
MTE 050T,MTE 065T,MTE 143T,MTE 145T,MTE 210T,MTE 265T,MTE 415T