This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.

JMY628C is a RFID read/write module with UART, IIC or USB port. JMY628C has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module.

The module and antenna is integrated. The impedance between RF circuit and antenna was tuned by impedance analyzer, and then the module has excellent performance and stability. There is ferrite plate between main PCB and antenna, so such design applies to some metallic-around systems.

 

 

PCD model: NXP RC522, RC523

Working frequency: 13.56MHz

Supported standard: Mifare Classic, ISO14443A, ISO14443B

Card supported: Mifare 1K/4K, FM11RF08, Ultra Light, DesFire, Mifare ProX, SR176, SRI512, SRI1K, SRI2K, SRI4K, SRIX4K, T=CL CPU cards(both ISO14443A & ISO14443B)

Anti collision ability: Full function anti collision; be able to process multi-cards; be able to set operate single card only

Auto detecting card: Supported, default OFF. The default state can be set

Power supply: DC 5V (±0.5V)

Interface: IIC/UART/USB (select while place order)

Communication rate: IIC: 400Kbps

UART: 19.2Kbps/115.2Kbps

USB: USB 1.1 HID class

Max. command length: 254 Bytes

Interface level: UART/IIC: 3.3V (TTL level; 5V tolerance)

Static power consumption: 150mA

Operating distance: 80mm (depending on card)

Dimension: 50mm*50mm*7.5mm

Weight: About 20g

ISP: Supported

Operating temperature: -25 to +85°C

Storage temperature: -40 to +125°C

RoHS: Compliant