aluminum window bending machine
Aluminum window bending machine Introduction:
1. Mode: LMB-120
2. Aluminum window bending machine Technical Parameters:
| * Power of motor | 1.5KW | |||||
| * Power supply | 380,50HZ | |||||
| * Rated oil pump pressure | 16MPA | |||||
| * Height of machined profile | MAX 120MM | |||||
| * Width of applicable profile | 90MM | |||||
| * Air source pressure | 0.5-0.8MPA | |||||
| * Air consumption | 2L/MIN | |||||
| * Pressure of total corner combination | 48KN | |||||
| * Movement travel of corner combination cylinder | 85MM | |||||
| * Adjustment range of main locating piece | 70MM | |||||
| * External dimension | 1850×1680×1210MM | |||||
| * Weight | 300KG | |||||
3. Aluminum window bending machine Prefomance features;
1).
The power is controlled by hydraulic system, smooth and reliable in operation
2).
Right and left punches realize the synchronized rigid feed to tighten the
combination of window corners
3).
Single-tool multipoint corner combination cutter can be configured so that the
corner combination of heat insulation bridge-cut-off aluminum doors and window
is more reliable
4).
The body is welded according to Chinese Standard steel plate profession and is
undertaken the aging treatment to ensure the rigidity