JN Model Series Multifunctional Alcohol Recovery Concentrator
The concentrator is applicable for industrial alcohol recycling of traditional Chinese medicine, Western medicine, glucose, wine brewing, starch, oral liquid, chemical industry, food and monosodium glutamate. The concentrator can be used in the low temperature vacuum concentration of heat sensitive substances with small batches and large varieties.

 

EQUIPMENT CHARACTERISTICS:

1. Alcohol recovery: Large recovery capacity. Adopt vacuum operation method and improve the process flow of device. The recovery rate can amount to 95%, the loss rate of alcohol is lower than 5%, and the energy consumption is 30% reduced. It is the energy saving equipment with small investment and high recovery benefit.

2. Liquid concentration: The concentrator adopts external heating natural cycling mode and vacuum negative pressure evaporating mode, with instant evaporation and great concentrated specific gravity up to 1.4. The liquid materials are concentrated without foam under the completely sealed status. The liquid medicine concentrated from the equipment has no pollution, and has strong flavor of medicine. The cleaning is convenient. Just open the upper and lower covers of the heater. The operation is convenient, the space is small, the appearance is beautiful and the heater, evaporator and heat preservation are completely equipped before leaving the factory. The parts of the equipment contacting with liquid materials are made of AISI304 stainless steel. The heat preservation adopts polyurethane foaming or pearl cotton and the exterior surface adopts grinding semiluster polishing. It is in accordance with cGMP medicine standard.

TECHNICAL PARAMTERS

Model Specification	JN-500	JN-1000	JN-1500
Evapotation quantity (kg/h)	500	1000	1500
Density of recovery alcohol	85%	85%	85%
Recovery quantity (kg/h)	200	350	500
Steam pressure (Mpa)	0.098
Vacuum degree	0.06-0.07MPa
Heating area (㎡)	8	16	25
Volume of evaporation room (m³)	1.0	1.5	2

Model Specification	JN-500	JN-1000	JN-1500
Condensing area (㎡)	10	15	20
Cooling area (㎡)	6	12	16
Steam volume (m³)	0.2	0.3	0.3
Steam consumption (kg/h)	500	1000	1500
Water consumption (kg/h)	7	12	20
Vent of heated steam (m/m)	40	40	50
Inlet and outlet of cooling water (m/m)	40	40	50