Industry, wood saw blade precision
300 * 3.2 * 30 * 60 t
300 * 3.2 * 30 * 72 t
300 * 3.2 * 30 * 96 t
350 * 3.5 * 30 * 84 t
350 * 3.5 * 30 * 72 t
Purpose: particle board, density board, melamine chipboard, 3 oxidation 2 aluminium panel
Characteristic: the saw blade for cutting below 35 mm hard faced chipboard, density board, laminated. Cover material, if any, should be installed with cross cutting saw blades.
Industry's brand double cross cutting saw blades
120 * 2.8/3.6 20/22 * * 12 + 12 t
Purpose: the cover side damage cross cutting, melamine chipboard, 3 oxidation 2 aluminium panel.
Features: used to double cross slot cover plate, through the increase or decrease in gasket cross cutting width adjustment. The best cross cutting depth under 2 mm.
Industry's brand saw monolithic plain cross cutting saw blades
120 * 2.8/4.0 20/22 * * 24 t
Purpose: the cover side damage cross cutting, melamine chipboard, 3 oxidation 2 aluminium panel.
Features: for double cross slot cover plate, through up and down adjustment saw shaft adjustment slot width.
Industry, electronic cutting saw blade
350 * 4.4 * 75 * 72 t
380 * 4.8 * 60 * 380 t
400 * 4.4 * 75 * 96 t
Purpose: particle board, medium density board, melamine chipboard, 3 oxidation 2 aluminium panel.
Characteristic: the saw blade for cutting hard faced chipboard, density board, multilayer board. Plate can be more than one layer. Cover material, if any, should be installed with cross cutting saw blades.
Industry the brand solid wood longitudinal section
25.4/30 * 300 * 3.2 * 24 t
25.4/30 * 300 * 3.2 * 28 t
25.4/30 * 300 * 3.2 * 48 t
25.4/30 * 3.2 * 300 * 60 t
30 * 350 * 3.5 * 32 t
350 * 3.5 * 30 * 54 t
Purpose: solid wood cutting, longitudinal cutting of bamboo
Features: solid wood longitudinal cutting saw blade, vertical and horizontal cross-sectional combination part specifications. Low noise, saw blade, sharp cutting, high precision.
Industry the brand solid wood transverse
255 * 1.8 * 30 * 120 t
25.4/30 * 3.0 * 255 * 100 t
25.4/30 * 3.0 * 255 * 120 t
25.4/30 * 3.0 * 305 * 120 t
25.4/30 * 305 * 3.0 * 120 t according to the different models can be organic and real wood cutting
Purpose: solid wood transverse, the transverse bamboo
Features: solid wood transverse saw blade. Low noise, saw blade, sharp cutting, high precision.
Industry's brand trim saws
305 * 3.0 * 25.4 * 48 t
305 * 4.0 * 25.4 * 48 t
355 * 4.0 * 50.8 * 70 t
405 * 5.0 * 30 * 70 t
455 * 5.0 * 50.8 * 80 t
Purpose: trimming
Features: plate gauge, trimming. High cutting quality.
Industry the brand speaker V machine special saw blade
250 * 3.0 * 30 * 60 t
280 * 3.0 * 25.4 * 90 t
Purpose: speaker V groove
Features: dedicated to the sound box and the box body V Angle cutting, high precision, durable.
Industry's brand special frame saws
25.4/30 * 2.2 * 250 * 100 t
25.4/30 * 2.8 * 255 * 80 t
25.4/30 * 3.0 * 255 * 100 t
25.4/30 * 3.0 * 255 * 120 t
25.4/30 * 3.2 * 305 * 100 t
25.4/30 * 3.2 * 305 * 120 t
Purpose: frame 45 degrees of inclined cut
Features: dedicated to material such as solid wood, gypsum, oil painting frame and all kinds of box body 45 degrees of inclined cut, high precision, durable.
Industry the brand plywood saw blade
255 * 3.2 * 30 * 100 t
255 * 3.2 * 30 * 120 t
300 * 3.2 * 30 * 100 t
300 * 3.2 * 30 * 120 t
Purpose: plywood, laminated
Features: apply to plywood, laminated and other high rubber sheet.
Industry's brand blade saw
305 * 2.6 * 70 * 36 t
350 * 3.5 * 70 * 30 t
Purpose: solid wood cutting, sawing solid mu fu joins a floor board, joinery board core board core board saws, solid mu fu joins a floor board table slabs cut saw
Features: longitudinal incision is applicable to real wood material, with groups improve efficiency. The cutting effect is good, durable.
Can according to customer's actual demand at the same time, the production of different specifications of saw blade.
Multichip saw, saw blade, just as its name implies, is more pieces together to install and use the saw blade, general is given priority to with alloy saw blade. Multichip saw blade is commonly used in wood processing, such as: cedar, cypress and pine, eucalyptus wood, import timber and miscellaneous wood, etc., are widely used in log processing, keel processing, furniture production, etc, more than simple blade saw generally can be installed 3-6 piece of saw blade, large blade saw even more can be installed more than 40, greatly improving the efficiency of the workers.
Many saw, saw blade diameter
Basically see the install limit of machine and cutting material thickness, small diameter of 110 mm, large diameter up to 450 or more, part of the saw blade and installed at the same time, according to the requirement of the machine need around or installed at the same time, in the don't increase the blade diameter, reduce the cost of saw blade under the premise of achieve a bigger cutting thickness.
More than the number of teeth on the blade saw saw blade
In order to reduce the resistance of the machine, increase the durability of saw blade, reduce noise, the more the number of teeth on the blade saw blade general design is less.
The thickness of the blade saw saw blade
The thickness of the saw blade is theoretically we hope saw blades, the thinner the better kerf is actually a kind of consumption. Some trimming equipment design has a direct effect, need to install the saw blade saw edge, more trimming saw blades are usually upset saw blade, to ensure the smoothness of the edge cutting.
Multichip aperture and tooth saw blade
Multichip saw blade aperture of the first to see the demand of the machine, of course, as is more installed together, in order to guarantee stability, general design aperture is bigger than conventional hole size, most of the increase in pore size at the same time with other special flange, slotting and design, to facilitate adding coolant cooling, increased stability. Generally 110-200 - mm diameter hole size between 35 and 40, 230-300 - mm diameter hole size between 40 and 70, more than 300 mm blades usually less than 50 mm. Multichip saw blade tooth form of the general is given priority to with left teeth, a handful of small diameter of the saw blade is designed for flat teeth.
Chip saw blade coating
Multichip saw, saw blade grinding after the completion of the welding, coating processing commonly, allegedly can prolong service life, is mainly to the appearance of the saw blade is beautiful, especially with a scraper blade saw blade welding current level, have very obvious welding mark scraper, so to make the coating processing, in order to protect and beautiful.
Saw blades with a scraper more
Scraper blade saw, saw blade is a kind of trend, more foreign companies more earlier before invented the scraper blade saw, saw blade. In wet wood and hardwood cutting, in order to achieve a better cutting effect, reduce the burning blade tooth paste, increase the mechanical ability of chip removal, decrease The Times of grinding and increase durability. However, scraper blade multi-disc saw blade grinding hard, generally can't grinding equipment, the price is relatively high.