Product description:

Automatic Knife Grinding Machine Model DMSQ-HF-M-FJ, gantry body, which adopts the carbon constructional quality steel. It's equipped two grinding motors which can grind the blades in one time by different stones. the transmission is linear guide and rack and pinion system, that the machine can last longer, travel more stable drive.

 

Automatic feed grinding wheel by the PLC program control system, automatic control, and memory, storage and dynamic tracking, simple operation, greatly reducing the time to prepare workpiece, can automatically adjust times of coarse grinding and accurate grinding.

 

the multi-layer filter device consists of magnetic separator and paper filter which mechanism transmission, chain, chain network and micro-switch, etc.

 

the first step filter via the magnetic separator and then the purified liquid goes to the filtering paper on the conveyer belt, with the constant accumulation of impurities on the filtering paper and filtration capacity decreased, the liquid level will gradually rise, when it reaches to the specified position, float ball rises and micro-switch turn on, the reducer drives the conveyer belt mesh forward and takes the sewage & dirty paper into the sewage tank, then the liquid level drops and the micro-switch resets.

 

the tank with water shortage alarm device which can measure and control the water level so as to effectively save time and improve efficiency.

 

the machine is the best choice for medium-sized printing warehouse, special for polar and other high-speed steel and carbide steel blade sharpening.

 

Main feature:

Imported linear guide

Auto greaser device

 multi-layer filter device

Imported electrical components (critical control systems are imported electrical appliances)

HMI touch screen

Water-cooled motor grinding

 purification device

Grinding head can move back and forth

Frequency Control (stroke movement)

Automatic grinding stone feeding

Main transmission: rack and pinion transmission

Gantry body

Magnetic chuck

Turbine worm transmission

 

MaintEchnical parameter:

Grinding wheel dimension (ring shape): 200*150*100mm

Max. Grinding width: 300 mm subject 22°

Efficient height between grinding wheel and working table: 80 mm

Circumrotating angle of working table: 0~±90°mm

Rotate speed of the wheel head: 0~1800 R/Min (frequency adjustable)

Motor movingSpeed: 3~20 m/min (frequency adjustable)

Power of the grinding head motor: 4kw

Power of the driving motor: 0.55kw

Power of the pump electric motor: 0.75kw