Specifications
1. resistance to deformation, high-temperature
2. high reproduction times
3. good tensile strength
4. excellent operabilit
1. resistance to deformation, high-temperature
2. high reproduction times
3. good tensile strength
4. excellent operabilit
Introduction
This product is two-component, RTV silicone rubber which with long service life and durable, especially suitable for the mold manufacture of silicone rubber.
Feature
Superior liquidity; Easy to operation; Deep vulcanization permission; stable molding size; Heat and chemicals resistance; Good physical properties
Application
Especially suitable for the molding manufacture of UPR and other craft products, mold making silicone
How to use
1. The cast pouring, for example:
Prepare a frame, fix the prototype for copy into the frame, (if the prototype’s material is glass or ceramic, the release agent is necessary to prevent sticking.
2. Take 2~3%curing agent of RTV, and mix it evenly with rubber.
3. Vacuum deforming in 1~3 min, inject the rubber into the type box, then vacuum deforming again, curing 24 hours in nature room temperature, use it after demand.
4. Detmold after 3 hours’ room temperature curing, and then use it after 24 hours’ keep mold under the same condition.
This product is two-component, RTV silicone rubber which with long service life and durable, especially suitable for the mold manufacture of silicone rubber.
Feature
Superior liquidity; Easy to operation; Deep vulcanization permission; stable molding size; Heat and chemicals resistance; Good physical properties
Application
Especially suitable for the molding manufacture of UPR and other craft products, mold making silicone
How to use
1. The cast pouring, for example:
Prepare a frame, fix the prototype for copy into the frame, (if the prototype’s material is glass or ceramic, the release agent is necessary to prevent sticking.
2. Take 2~3%curing agent of RTV, and mix it evenly with rubber.
3. Vacuum deforming in 1~3 min, inject the rubber into the type box, then vacuum deforming again, curing 24 hours in nature room temperature, use it after demand.
4. Detmold after 3 hours’ room temperature curing, and then use it after 24 hours’ keep mold under the same condition.
Why does the silicone mold have few molding times?
The silicone rubber mold has few molding times is due to following reasons: adding too much silicone oil which will destroy the molecular of silicone material; making the mold for small and fine detailed products with higher hardness silicone material which is easy to break; making the mold for large products with soft silicone material which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.