APT Pure Sine Wave Inverter, Charger
APT pure sine wave inverter is the latest model presented by Yiyuan Electric Co.,Ltd.. Developed on the base of our previous PSW 7 series, the APT charger has achieved significant improvements on battery charging, AC transfer, etc. By adopting DIP (dual in-line package) switch, the APT pure sine wave inverter provides more smart options for users to customize the performance of the device. With tower shape design, APT charger is more convenient for use in movable applications.
Features of APT Pure Sine Wave Inverter, Charger
1. Our APT charger allows start up and through power with depleted batteries. Its powerful charge rate up to 90Amp**.
2. It can offer 3-step intelligent battery charging, and equipped with 8 preset battery type selector for totally flat batteries.
3. LCD status display, battery/AC priority switch, USB communication port are available for our APT pure sine wave inverter, it also has 17 alarms/warnings for easier operation and trouble-shooting, and ability to switch the unit on/off. In addition, select/deselect power saver mode can be used too.
4. High overload ability of our APT charger is up to 300% rated power(20 sec.).
5. APT pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10W(3s sensing cycle)/3W(30s sensing cycle) *. It can extract max. power from various batteries with different protections, and low voltage trip can be selected (9.5V/10V or 10V/10.5V).
6. Uses PFC(power factor correction) for charger, which has less power consumption than conventional units.
7. It has 15s delay before transfer when AC resumes, and overload protection when our APT pure sine wave inverter equips with generator.
8. 10ms typical transfer time between battery and AC, which guarantees power continuity of APT charger. Uses selectable input AC voltage (184-253V or 154-253V) for different kinds of loads.
Note:*For 1KW one. **For some models.
1. Our APT charger allows start up and through power with depleted batteries. Its powerful charge rate up to 90Amp**.
2. It can offer 3-step intelligent battery charging, and equipped with 8 preset battery type selector for totally flat batteries.
3. LCD status display, battery/AC priority switch, USB communication port are available for our APT pure sine wave inverter, it also has 17 alarms/warnings for easier operation and trouble-shooting, and ability to switch the unit on/off. In addition, select/deselect power saver mode can be used too.
4. High overload ability of our APT charger is up to 300% rated power(20 sec.).
5. APT pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10W(3s sensing cycle)/3W(30s sensing cycle) *. It can extract max. power from various batteries with different protections, and low voltage trip can be selected (9.5V/10V or 10V/10.5V).
6. Uses PFC(power factor correction) for charger, which has less power consumption than conventional units.
7. It has 15s delay before transfer when AC resumes, and overload protection when our APT pure sine wave inverter equips with generator.
8. 10ms typical transfer time between battery and AC, which guarantees power continuity of APT charger. Uses selectable input AC voltage (184-253V or 154-253V) for different kinds of loads.
Note:*For 1KW one. **For some models.
Technical Parameters of APT Series Inverter& Charger | |||||||
Electrical Specvifications | |||||||
Model | APT 4000W | APT 5000W | APT 6000W | ||||
Output (Inverter mode) | Continuous Output Power | 4000W | 5000W | 6000W | |||
Surge Rating | 12000W | 15000W | 18000W | ||||
Output Waveform | Pure Sine wave/Same as input(Bypass mode) | ||||||
Nominal Efficiency | >88%(Peak) | ||||||
Line Mode Efficiency | >95% | ||||||
Power Factor | 0.9-1.0 | ||||||
Nominal Output Voltage rms | 100-110-120Vac / 220-230-240Vac | ||||||
Output Voltage Regulation | ±10% RMS | ||||||
Output Frequency | 50Hz ± 0.3Hz/60Hz ± 0.3Hz | ||||||
Short Circuit Protection | Yes( 1sec after fault ) | ||||||
Typical Line Stansfer Time | 10ms | ||||||
THD | < 10% | ||||||
DC Input | Nominal Input Voltage | 24V | 48V | ||||
Minimum Start Voltage | 20V | 40V | |||||
Low Battery Alarm | 21V | 42V | |||||
Low Battery Trip | 20V | 40V | |||||
High Voltage Alarm | 32V | 64V | |||||
Low Battery voltage recover | 26V | 52V | |||||
Idle Consumption-Search Mode | < 25 W when Power Saver On | ||||||
AC Charger | Input Voltage Range |
Wide: 90~135VAC / 164~243VAC; Narraw: 100~135VAC / 194~243VAC; |
|||||
Output Voltage | Depends on battery type | ||||||
Max Charge Rate | 35A / 70-90A Max (Charger Current Control) | ||||||
Battery Initial Voltage for Start Up | 0-31.4V for 24V( *2 for 48Vdc) | ||||||
Over Charge Protection Shutdown | 31.4V for 24V (*2 for 48Vdc) | ||||||
Charger curve(4 stage constant current) 4 step digital controlled progressive charge |
Battery types (*2 for 48Vdc) | ||||||
Battery type | Fast V | Float V | |||||
Gel U.S.A | 28.0 | 27.4 | |||||
A.G.M 1 | 28.2 | 26.8 | |||||
A.G.M 2 | 29.2 | 27.4 | |||||
Sealed Lead Acid | 28.8 | 27.2 | |||||
Gel Euro | 28.8 | 27.6 | |||||
Open Lead Acid | 29.6 | 26.6 | |||||
Calcium | 30.2 | 27.2 | |||||
De-sulphation | 31.0Vdc for 4hrs | ||||||
Remote Control | Yes. Optional | ||||||
Bypass & Protection | Input Voltage Waveform | Sine wave (Grid or Generator) | |||||
Nominal Voltage | 120VAC | 230VAC | |||||
Low Voltage Trip | 90V±4% | 184V/154V±4% | |||||
Low Voltage re engage | 100V±4% | 194V/164V±4% | |||||
High Voltage Trip | 140V±4% | 253V±4% | |||||
High Voltage re engage | 135V±4% | 243V±4% | |||||
Max Input AC Voltage | 150VAC | 270VAC | |||||
Nominal Input Frequency | 50Hz or 60Hz (Auto detect) | ||||||
Low freq trip | 47Hz± 0.3Hz for 50Hz, 57Hz± 0.3Hz for 60Hz | ||||||
Low freq re engage | 48Hz± 0.3Hz for 50Hz, 58Hz± 0.3Hz for 60Hz | ||||||
High freq trip | 55Hz± 0.3Hz for 50Hz, 65Hz± 0.3Hz for 60Hz | ||||||
High freq re engage | 54Hz± 0.3Hz for 50Hz, 64Hz± 0.3Hz for 60Hz | ||||||
Overload protection | Circuit breaker | ||||||
Short circuit protection | Circuit breaker | ||||||
Transfer switch rating | 30amp | 40amp | |||||
Mechanical Specifications | Mounting | Wall mount | |||||
Inverter Dimensions(L*W*H) | 470*190*340mm | ||||||
Inverter Weight | 38KG | 48KG | 48KG | ||||
Shipping Dimensions(L*W*H) | 530*240*390mm | ||||||
Shipping Weight | 40KG | 50KG | 50KG | ||||
Display | Status LEDs / Status LEDs+LCD | ||||||
Standard Warranty | 1 Year |