Specifications
Input voltage range: 9.0—50.0VDC Maximum input current limit: <65A
Maximum charge/discharge current: 70A@Syn. Mode 40A@Asyn. Mode Maximum charge power capacity: 2000W (Channel 1400W @input > 23.5V) Maximum discharge power capacity: 200W (Channel 130W) Maximum regenerative discharge power capacity: 2000W (Channel 1400W) Maximum extra discharge power capacity: 3200W (Channel 1600W @40V/40A)
Maximum current drain for balancing: 2.4A@Syn. Mode 1.2A@Asyn. Mode
4010DUO Special Features
1. The 4010DUO uses advanced Synchronous buck-boost DC/DC converter technology, high power, a high current and high-performance power conversion circuit. The maximum charge power capacity is up to 2000W, the maximum charge/discharge current of a channel is up to 40A, and two channels in Synchronous Mode are up to 70A. 2. Channel Supports 10s LiPo, Lilo, LiFe, with maximum 1.2A balance current, and adopts a unique balance calculation of internal resistance correction. 3. Intelligent fan control. Sensing internal temperature via the internal temperature sensor, to thereby control the fan speed. 4. Internal temperature protection. When the internal temperature exceeds the Power Reduce temperature, the output power is automatically reduced; and the charger will shut down when temperature exceeds the Shut-down temperature. 5. 64 parameters sets can be saved, without repeat setting when in use, just import/export via SD card. 6. A TFT LCD screen provides rich information including current, voltage, power, capacity, internal resistance, control status, time-consuming and temperature, etc. 7. Multi-discharge features: self-discharge, regenerative to input discharge, regenerative to channel discharge, and lithium battery extra expanding discharge. 8. Supports measurement for internal resistance of battery offline and online. Can measure not only the internal resistance of the entire battery pack, but also measure the internal resistance of each cell within the lithium battery. 9. The iCharger has protection for reversed polarity (input or output), input voltage/current, battery temperature, charging capacity, overrun time and maximum power etc. 10. Supports upgrading the hardware program by USB port. The iCharger also supports the “Logview” software and can display, plot and analyze the charge and discharge data by it.
Input voltage range: 9.0—50.0VDC Maximum input current limit: <65A
Maximum charge/discharge current: 70A@Syn. Mode 40A@Asyn. Mode Maximum charge power capacity: 2000W (Channel 1400W @input > 23.5V) Maximum discharge power capacity: 200W (Channel 130W) Maximum regenerative discharge power capacity: 2000W (Channel 1400W) Maximum extra discharge power capacity: 3200W (Channel 1600W @40V/40A)
Maximum current drain for balancing: 2.4A@Syn. Mode 1.2A@Asyn. Mode
4010DUO Special Features
1. The 4010DUO uses advanced Synchronous buck-boost DC/DC converter technology, high power, a high current and high-performance power conversion circuit. The maximum charge power capacity is up to 2000W, the maximum charge/discharge current of a channel is up to 40A, and two channels in Synchronous Mode are up to 70A. 2. Channel Supports 10s LiPo, Lilo, LiFe, with maximum 1.2A balance current, and adopts a unique balance calculation of internal resistance correction. 3. Intelligent fan control. Sensing internal temperature via the internal temperature sensor, to thereby control the fan speed. 4. Internal temperature protection. When the internal temperature exceeds the Power Reduce temperature, the output power is automatically reduced; and the charger will shut down when temperature exceeds the Shut-down temperature. 5. 64 parameters sets can be saved, without repeat setting when in use, just import/export via SD card. 6. A TFT LCD screen provides rich information including current, voltage, power, capacity, internal resistance, control status, time-consuming and temperature, etc. 7. Multi-discharge features: self-discharge, regenerative to input discharge, regenerative to channel discharge, and lithium battery extra expanding discharge. 8. Supports measurement for internal resistance of battery offline and online. Can measure not only the internal resistance of the entire battery pack, but also measure the internal resistance of each cell within the lithium battery. 9. The iCharger has protection for reversed polarity (input or output), input voltage/current, battery temperature, charging capacity, overrun time and maximum power etc. 10. Supports upgrading the hardware program by USB port. The iCharger also supports the “Logview” software and can display, plot and analyze the charge and discharge data by it.