• It consists of brass nozzle body with internal stainless steel core and stainless steel guide vane (with a leak-proof device).
• The liquid flows at high velocity under the water pressure of 70kg to 120kg, forming centrifugal swirl and spraying very fine hollow droplet.
• It is equipped with TEFLON strainer and the fog droplet sizes are about 50um.
• Widely used in workshop moistening salt spray test,man-made fog and other moistening locations.
• The imported US punching machine punches orifice about 0.1 to 0.15mm in size.
• The nozzle saves 10times or above cost than that of moistening by air.

Performance Data
Brass Nozzle	Orifice Diameter	Operation Pressure	Flow Rate
FD1	0.15mm	20-70kg/cm	20-46cc/min
FD2	0.20mm		49-89cc/min
FD3	0.30mm		80-145cc/min
FD4	0.40mm		95-178cc/min
FD5	0.50mm		130-243cc/min