Mark case maker SCM 55 is automation to the conventional manual case making process. SCM 55 ensures high productivity, superior & uniform case quality throughout the job run. SCM 55 is designed and developed with special concern on consistent quality, simple operation, large variety of jobs, ease of maintenance & most suitable size for binding. SCM 55 has automatic board gauge up-down system to keep operator handsfree. It has amazingly short new job setup time of less than 5 minutes.
Case making for hard bound books, diaries, files, registers, notebooks, calendars, clip boards etc. Back to back pasting & pressing for duplex boards, pharmaceutical catalogs and other packaging items.
• Automatic glue tank temperature control with auto cut off for optimum power saving
• Uniform thickness of glue layer on title sheet with easy adjust control
• Vacuum table and  vacuum blower for easy handling of thin sheets
• Precise title and Spine (board) gauging unit up to 4 spines
• Short make ready time (Approx. 20 mins for hot glue, immediate for cold glue)
• 100 Micron thick hard chrome plated roller/ Stainless Steel rollers (Optional)
• Best quality control panel components used to make machine most reliable.

TECHNICAL DATA (mm)	CASE MAKER SCM 55
Min. case size	150 mm x 150 mm
Max. case size	500 mm x 750 mm
Paper thickness	70 gsm To 170 gsm
Board thickness	0.5 mm To 5 mm
Turning in width	15 To 25 mm
Speed*	200 case/hr depending upon case size, material
Glue type	Hot / Cold
Pneumatic pressure	6 - 8 bar
Power	2 HP for 2 AC variable speed motors, 2 kW for heater
Materials	Paper, laminated, paper, plastic coated paper, cloth
Floor space**	1200 mm (L) x 2800 mm  (W) x 1500 mm (H)
1 HP air compressor	to be provided by client