| Model | AT-100 | AT-225 | AT-500 | AT-800 | AT-1000 |
| Workroom Dimensions (cm) | 45*45*50 | 50*60*75 | 70*80*90 | 80*100*100 | 100*100*100 |
| Exterior dimensions (cm) | 105*97*176.5 | 105*102*200 | 132*132*217 | 147*152*231.5 | 167*152*231.5 |
| Power | 6.0(KW) | 7.0(KW) | 13.5(KW) | 15.0(KW) | 16.5(KW) |
| Temperature Range(ºC) | A:-20~150 B:-40~150 C:-60~150 D:-70~150 | ||||
| Humidity Range | 30~98% R.H | ||||
| Fluctuation / Uniformity(ºC) | ≤±0.5 / ≤±2 | ||||
| Humidity Deviation | +2, -3% R.H | ||||
| Temp-Ramp up (Heating) Time | 1.0~3.0ºC/min | ||||
| Temp-Ramp Down(Cooling) Time | 0.7~1.0ºC/min | ||||
B. STRUCTURE
1. Interior Material: Stainless Steel Plate (SUS#304)
2. Exterior Material: A3 Steel Plate sprayed with special coating
3. Insulation Material: Double-layer, High Temperature resistant and high
Intensity seal is applied between the chamber door and
chamber body to ensure high performance
4. Heater: Fin Heat Disperse Pipe Stainless Steel-Electric Heater
5. Humidifier: Stainless Steel Heater with Auto Adjust
6. Airflow Cycling System: Unique System for providing uniform airflow
7. Door & Window: Single Door with Observation Window,
(Heating cords set around the door to prevent Condensation)
C. REFRIGERATION SYSTEM
1. Compressor Hermetic Compressor- 2HP, Tecumseh
Option B: two compressors;
Option C: two compressors;
Option D: two compressors
2. Refrigerant Type: DuPont Type 404A (Without Fluorine)
3. Condenser: Air Cooled with Fan
4. Evaporator: Fin with several segments Auto adjustment
D. CONTROLLER PROGRAMMABLE COLOR LCD Model TEMI 800
1. Controller Specifications LCD DISPLAY COLOR TOUCH SCREEN KEY IN
User friendly Color-LCD interactive touch-screen system powerful controller with several Programmable and Fixed Value features such as:
100 Programs and 1200 Segments with Run time of 99H 59M ea. to set up
Temp-Hum profiles per user requirements.
Data Storage and profile recall
Communications: RS485/RS232 - PC Interface
2. Control Panel
a. Lighted Push Button switch for POWER
b. Lighted Push Button for chamber lighting
c. RS232/485 port for PC interface
d. Over Temperature protector -- Manually settable
e. Emergency reset switch (EMO)- Optional
E. SAFETY DEVICES
a. Ground protection
b. Three phase Over voltage, Under voltage, Phase loss and Phase Sequence Protection
c. Leakage/Circuit protection
d. Heater and Humidifier heater short-circuit protection
e. Circulation Fan motor overload protection
f. Compressor Overload protection
g. Compressor High Pressure protection
h. Independent over-temperature alarm system
i. Lack of Water protection (Humidification)
j. Circuit breaker
k. Emergency Shut Off Switch (EMO)-Optional
F. ACCESSORIES
a. Cable Access One (2") (50mm) cable access port with plug
b. Temp-Humidity Sensors: SUS #304L stainless steel PT 100Ω platinum resistance
c. AC Power Cord Low Impedance, Length 2.5m
d. Shelves Two Sets of Stainless Steel Shelves with adjustable
Brackets
e. Door Sealing Environmentally safe Silicone rubber which is high
temperature resistance, aging resistance, with
excellent good sealing capability
f. Casters Heavy Duty Set of 4 (adjustable mobile casters)
g. Humidity Sensing method: Wet and dry bulb
h.
i. Water Supply
1. Internal Water Tank
2. Water Inlet Valve
G. FACILITIES
POWER: 220VAC/50/60Hz/Single Phase/15A/6.0Kw
Chamber Environment:
Temperature: 5~28C
Humidity: <85%