Product Introduction
Two component Screen Printing Silicon is one environmental and nontoxic special one which is transparent, two-component, high strength, high transparent, High tear resistance, softy, High adhesive and little shrinkage. It’s a kind of new printing material with five hours of operation time. It’s widely used for Three-dimensional brand trademark, Clothing printed printing, braid and Silk screen printed words.
Two component Screen Printing Silicon is one environmental and nontoxic special one which is transparent, two-component, high strength, high transparent, High tear resistance, softy, High adhesive and little shrinkage. It’s a kind of new printing material with five hours of operation time. It’s widely used for Three-dimensional brand trademark, Clothing printed printing, braid and Silk screen printed words.
Characteristics
1.Viscosity Moderate, fast cure temperature
2.Good adhesive and excellent peel strength
3.High trasparency
4.High wear resistance and radiance
5.Water-proof, anti-skidding, gas permeability
6.Resistance of temperature range
7.Good levelling property
1.Viscosity Moderate, fast cure temperature
2.Good adhesive and excellent peel strength
3.High trasparency
4.High wear resistance and radiance
5.Water-proof, anti-skidding, gas permeability
6.Resistance of temperature range
7.Good levelling property
Application
1. Used in textile: Clothing, clothing design, sports sign gloves and other tools to slippery resistance,
1. Used in textile: Clothing, clothing design, sports sign gloves and other tools to slippery resistance,
waterproof; ;sighs of Handbags, traveling bags, suitcase ect.
2. Used for leather and imitation leather surface coating processing
3. Used to print design, decoration, etc
Instructions
Use proportion is A:B=10:1. Before using, the A and B component should be mixed fully in proportion. Rest for deaeration or Vacuum deaerationCan't contact with N, P, S plasma compounds, and vinyl compounds contains alkyne, in order to avoid make platinum catalyst poisoning and can't cure, expecially for PVC contains Pb, it will make platinum catalyst poisoning, so that can also lead Organic pigments to curing slow down or not curing.
2. Used for leather and imitation leather surface coating processing
3. Used to print design, decoration, etc
Instructions
Use proportion is A:B=10:1. Before using, the A and B component should be mixed fully in proportion. Rest for deaeration or Vacuum deaerationCan't contact with N, P, S plasma compounds, and vinyl compounds contains alkyne, in order to avoid make platinum catalyst poisoning and can't cure, expecially for PVC contains Pb, it will make platinum catalyst poisoning, so that can also lead Organic pigments to curing slow down or not curing.
1. A component 20KG/ plastic, B component 2KG/plastic carriage
2. Within 20 days after deposit.