Typical Application of  liquid silicone for LED , LCD potting 

 9055 is suitable for bonded seal of electronic components, power module and control module, LED invertor potting, etc which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.

 

Product Feature of   liquid silicone for LED , LCD potting

It can be applied to the sealing and pouring of various electronic components, and then forming insulation system with no corrosion and negligible shrinkage.

l         Room temperature vulcanize, and easy to operate;

l         Maintain flexibility at a wide temperature range, and excellent insulation performance;

l         Waterproof, moisture-proof, mouldproof, dustproof, and stable components;

l         Resistance to Chemical dielectric, anti-yellowing, resistance to climate ageing.

 

   

 

Technical Parameters of  liquid silicone for LED , LCD potting

Before Curing	Appearence	Black Fluid
	Density(25°C  g/ml)	0.98±0.02
	Viscosisty(25°Ccps)	Part A 2500±500;Part B:2500±500
	Mixing Ratio	A:B=1:1(By weight)
	Operating Time(25°C  min)	120
	Curing time(25°C  min)	480
	Curing time(80°C  min)	20
After Curing	Hardness(Shore  A)	50-60
	Dielectric Strength(KV/mm)	23
	Volume Resistance(Ω.Cm)	1.0×10 15
	Permittivity(1.2MHz)	3.0
	Temperature Resistence(°C)	-60~200
	Fire Resistance	UL94-V1
	Arc Resistance	250V

 

(Pls note: the above data for this product in 25 °C temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers to when using.
The appearance can be adjusted by our technical department if required.)