Fabric Coating Silicon Rubber
Application of Fabric Coating Silicon Rubber :
It is specially used for skid-proof purpose of frilals, underclothes and widely applied for cotton fabric, polyester-mixed cotton cloth, nylon cloth, flax, woolen, insulating cloth, etc.
Specification of Fabric Coating Silicon Rubber:
-Low shrinkage(< 0.1%)
-Good skid-proof effect and high adhesive strength
-Wearproof, wash-resistant, high temperature resistant
-Non-toxic and odorless, food grade silicone
-High transparency and good tear-strength.
Fabric Coating Silicon Rubber is a 2-part liquid silicone with high transparency, great tear-strength and strong bonding force. This product portfolio is
complemented by water-based finished silicone rubber dispersions and a large number of special additives for customizing our standard grades. Textile coaters will thus find the perfect solution for every application at HY SILICONES.
Datasheet of Fabric Coating Silicon Rubber :
|
Model
|
TB0330
|
|
Appearance
|
Transparent
|
|
Hardness(shore A)
|
30± 2
|
|
Mix ratio(A: B)
|
1:1
|
|
Viscosity(mPa. S)
|
60000~80000
|
|
Tensile strength(Mpa)
|
4.6
|
|
Tear-strength(KN/m)
|
19± 2
|
|
Elongation(%)
|
360
|
|
Pot life/working time(25° C)
|
12-24 hours
|
|
curing time(120-150° C)
|
10~20 (Seconds)
|
Operation introduction:
1, Mix Part A and Part B as ratio 1:1, you may add additive such as pigment as ratio 1~2% into part A.
2, It can be cured by heating with 100~190 degree, the curing time will be 5~10 minutes.
SHELF LIFE:
8-10 months when stored under 24° C in original unopened packages.
PACKAGE:
If ratio is 1:1 : Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.
If ratio is 10:1 : Packed in 20kg/pail + 2kg/pail and 200kg/pail + 20kg/pail.