Silicone rubber for screen printing Ink
Specifications
1. Printing with swith silicone rubber products
2. Superior Elongation
3. No Harm to Human body
4. Superior Chemical resistance
Specifications
1. Printing with swith silicone rubber products
2. Superior Elongation
3. No Harm to Human body
4. Superior Chemical resistance
How to use
1. The cast pouring, for example:
Prepare a frame, fix the prototype for copy into the frame, (if the prototype’ s material is glass or ceramic, the release agent is necessary to prevent sticking.
2. Take 2~3%curing agent of RTV, and mix it evenly with rubber.
3. Vacuum deforming in 1~3 min, inject the rubber into the type box, then vacuum deforming again, curing 24 hours in nature room temperature, use it after demand.
4. Detmold after 3 hours’ room temperature curing, and then use it after 24 hours’ keep mold under the same condition
(Note: our company does not recommend you to add silicone oil. If a special soft silicone mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demold. )
Technical datasheet:
| model | appearance | hardness (shore A) | mix ratio (A: B) | viscosity(mPa. S) | tensile strength (Mpa) | tear-strength((kN/m) | elongation (%) | pot life/working time(25° C) | curing time (25° C) |
| TB0330 |
translucent |
30± 2 | 01:01 | 60000± 80000 | 4.6 | ≥ 35 | ≥ 360 | 12-24hrs | 40~60(mins) |
Silicone ink for Characteristic:
Easy and simply operation 10A: 1B with normal printing process
Catalyzed by platinum, no toxicity and non-corrosiveness
No solvent or cured by products
Non pollution environment, environment friendly silicone ink,
Non harm to human body. Caused by the organic solvent into environment friendly, in noxious ink
Non cause environmental problems when test and destroy ester of silicone ink.
Silicon Ink with SGS approval, the silicone ink based on safety design easily pass any international inspection
Cured silicone in with high elastic, soft smooth hand feeling when touch, slippery, high stretchable and non bleeding
adhered on textile fiber well after being cured and forms elastomeric of silicone .
Good ink for silicone rubber products and latex with great adhesive.
Produce high tear strength, create high quality printing effect.
Moderate fluidity and cure time application. Easy process
Low and higher temperature resistance(-50 to 300)