Silicone Ink for Screen Printing
Silicone Ink for Screen Printing by hot air Gun is a 2-part liquid silicone with high transparency, great tear-strength and strong bonding force. This product portfolio is
complemented by water-based finished silicone rubber dispersions and a large number of special additives for customizing our standard grades. Textile coaters will thus find the perfect solution for every application at HY SILICONES.
Application of Silicone Ink for Screen Printing :
It is specially used for skid-proof purpose of frilals, underclothes and widely applied for cotton fabric, polyester-mixed cotton cloth, nylon cloth, flax, woolen, insulating cloth, etc.
Specification of Silicone Ink for Screen Printing :
-Low shrinkage(<0.1%)
-Good skid-proof effect and high adhesive strength
-Wearproof, wash-resistant, high temperature resistant
-Non-toxic and odorless, food grade silicone
-High transparency and good tear-strength.
Datasheet of Silicone Ink for screen Printing :
|
Model
|
TB0315
|
|
Appearance
|
Transparent
|
|
Hardness(shore A)
|
15±2
|
|
Mix ratio(A:B)
|
1:1
|
|
Viscosity(mPa.s)
|
60000~100000
|
|
Tensile strength(Mpa)
|
4.6
|
|
Tear-strength(KN/m)
|
19±2
|
|
Elongation(%)
|
360
|
|
Pot life/working time(25°C)
|
12-24 hours
|
|
curing time(100-120°C)
|
10~20(mins)
|
Operation introduction:
1,Mix Part A and Part B as ratio 1:1, you may add additive such as pigment as ratio 1~2% into part A.
2,It can be cured by heating with 100~190 degree, the curing time will be 5~10 minutes.
SHELF LIFE:
8-10 months when stored under 24°C in original unopened packages.
PACKAGE:
If ratio is 1:1 :Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.
If ratio is 10:1 :Packed in 20kg/pail + 2kg/pail and 200kg/pail + 20kg/pail.