Specification
• High reliability high accuracy and high speed
• No scratches and marks on the sheet surface after cutting
• Self-centering guiding unit for perfect stacking
• Predefined parameters can be set
• No scratches and marks on the sheet surface after cutting
• Self-centering guiding unit for perfect stacking
• Predefined parameters can be set
• Convenient for the installation and maintenance because of the user-friendly design
General introduction of cut to length line
Cut to length lines are sheet metal forming lines for strip material. The strip material is transferred from the coil, leveled, cut-to-length and stacked. By combining components according to our customers' specific production requirements we design customized lines that provide optimum production capacity. All functions can be controlled centrally.
Technical Data . Parameter
|
Material cutting
|
Cold roll steel, galvanize roll, stainless steel , aluminum
|
|
|
Item
|
Unit
|
Range
|
|
Thickness
|
MM
|
0.1-0.5;0.3-2;0.5-3;0.8-4;1-5;2-6
|
|
Width
|
MM
|
400-2200
|
|
Load weight
|
T
|
8T,10T,12T,16T, or customization
|
|
Leveling precision
|
MM/M2
|
±1.5
|
|
Measuring precision
|
MM ( in the situation of plate length 2000mm)
|
±0.5 in length;
±0.7 in diagonal
|
|
Line speed
|
M/MIN
|
0-80
|
|
Power
|
KW
|
About 80-95 (depends on equipment model and design)
|
|
Coil ID:
|
MM
|
Ф508, Ф610
|
|
Coil OD:
|
MM
|
Ф1000～Ф1600
|
|
Productivity
|
PIECE/MIN ( in the situation of plate length 2000mm)
|
22-25
|
Electric source:
Voltage: 380V, 3 phase, AC ±5%
Frequency: 50Hz±1%
LIST OF EQUIPMENTS UNDER SCOPE OF SUPPLY:
1. Coil car
2. Decoiler
3. Precision leveler
4. Loop Bridge
5. Side Guide Roller
6. Servo feeder
7. Shearing Machine
8. Conveyor table
9. Stacking table
10. Lifting table
11. Hydraulic Systems
12. Pneumatic Systems
13. Electrical System PLC Control