SY-A500 high pressure polyurethane spray foam machine
Brief introduction:
Polyurethane foaming material has many advantages such as indulation,heat proofing,noise proofing and anticorrative etc.Widely used in many areas.Environmental friendly and energy-saving.The insulation and heatproofing function are better than any other materials.
Application:
Mainly for pouring construction,spraying construction,buffer packaging.
For spraying:Building exterior and interior wall spraying,cold storage spraying, cabinet insulation and noiseproofing of car&bus,roof insulation and waterproof,refrigerated trucks and industrial anticorrative spraying.
For pouring:solar water heater,refrigerator,freezer,pipe joints,door-crack padding,products padding&packaging,roller shutter door,security door,road construction,wall noiseproofing,landscape modeling etc.
Technical specifications:
Heating power 9KW
|
Max working voltage
|
20Mpa
|
Driving mode
|
Fully pneumatic
|
|
Max output flow
|
9kg/min
|
Voltage requirements
|
2-ph 220V 50Hz/3-ph 380V 50Hz
|
|
Insulation material mixing ratio A:B
|
1:1
|
Pneumatic source
|
0.7-0.9Mpa 1m³/min
|
|
Heating mode
|
A,B,C heats independently
|
Machine size
|
800*700*1200mm
|
|
Heating temperature range
|
0-80°C
|
Net weight
|
140KG
|
|
Cleaning mode
|
Free cleaning
|
Max feeding tube length
|
90m
|
Standard configuration:
Main engine:1 unit
Spray gun:1 piece
Feeding pump:2 pieces
Material insulation pipe:15m/set(can be up to 75m)
Short tube connect with gun:1.5m
1 set of accompanied accessories