Minimum Order Quantity:   10 Set/Sets

Packaging Detail: Plastic bag and Carton or customerized

Delivery Detail:     1 ~ 7days after confirmation

1.Waterproof 144 core fiber optic splice
2,Capacity:144
3,Aerial-hanging,wall-mounting,direct-bury
4,ISO9001,ISO14001,TL

GJS30-5 144 core fiber optic splice closure with 2 in and 2 out is widely used in straight-through and branching application, and it’s suitable for aerial, duct wall-mounted and direct-buried. This type of fiber optical splice closure is made in super engineering material and stuffed with seal material inside, the external accessories and fastening pieces are made in high-quality stainless steel and it can be reused.

5. Closure body is made by Super ABS material, and the bolt was made in stainless steel

Fiber optical cable diameter(mm)	φ10~φ22
Max in and out cable No.	Two in and two out
Fiber melting No.	Single core:1~12 cores(can be extend to 16 cores);Ribbon beam :24 cores
Nestification way of the fiber melting spray	Hanging and page turning
Max fiber melting spray No	6
Max capacity	Single-core :72cores ;Ribbon beam :144cores
Sealing way	Mechanical Seals
Sealing tape	Unvulcanized self-adhesive sealing tape

Item	Quantity	Comments
Heat –shrinkable Protective Tube	Same as the core No.	A special requirement about the conventional heat shrink tubing with core and the ribbon optical fiber cable should be told or prepared by yourself
Self –adhesive Sealing Tape	2
Insulating tape	1 Roll
Nylon cable ties	4×fiber melting spray No.
Sealant Stoppers	8
Closure of the inlet and outlet	2
Stainless steel hooks	2
Inner hexagon spanner	1

Open the closure→fix the cable and check its length in the closure→strip off the cable and cable jacket→seek out the cable cores and get preparation for cable fixation→fix the strengthen cores and reorganize the extra cores→fix the cable an splice the cable→arrange the splice protective tube and fiber→complete inspection→install the dome.