SY-A500 high pressure new polyurethane foam machine
Brief introduction
The foaming polyurethane material has many advantages such as indulation,heat proofing and noiseproofing etc.Widely used in many areas.Environment friendly and energy saving.The heat proofing and insulation are better than any other.
Application:
Mainly for injection construction,spraying construction,buffer packaging.
For spraying:Building exterior and interior wall spraying,cold storage spraying, cabinet insulation and noiseproofing of car&bus,roof insulation and waterproof,refrigerated trucks and industrial anticorrative spraying.
For injecting:solar water heater,refrigerator,freezer,pipe joints,door-crack padding,products padding&packaging,roller shutter door,security door,road construction,wall noiseproofing,landscape modeling etc.
Technical specifications:
Heating power 9kw
|
Max working voltage
|
20Mpa
|
Driving mode
|
Fully pneumatic
|
|
Max output flow
|
9kg/min
|
Voltage requirements
|
2-ph 220V 50Hz/3-ph 380V 50Hz
|
|
Insulation material mixing ratio
|
1:1
|
Pneumatic source
|
0.7-0.9Mpa 1m³/min
|
|
Heating mode
|
A,B,C heats independently
|
Machine size
|
800*700*1200mm
|
|
Heating temperature range
|
0-80°C
|
Net weight
|
140KG
|
|
Cleaning mode
|
Free cleaning
|
Max feeding tube length
|
90m
|
Standard configuration:
Main engine:1 unit
Spray gun:1 piece
Feeding pump:2 pieces
Material insulation pipe:15m/set(can be up to 75m)
Short tube connect with gun:1.5m
1 set of accompanied accessories