-stainless Steel material
|
Item#
|
Description
|
Technical Parameters
|
|
1
|
Power:
|
6V AA alkaline batteries,
|
|
2
|
Static Electric Current:
|
Static Load<10Ua,Working Load: 100Ma-150Ma
|
|
3
|
Working Electric Current:
|
100-300mA
|
|
4
|
Card type
|
Mifare 1K/4K,
|
|
5
|
Battery Life:
|
18 months’ duration
|
|
6
|
Lock operation records
|
240pcs
|
|
7
|
Insert Reliability:
|
No mistake even showing continuously 2000 times
|
|
8
|
Insert Guarantee:
|
Still work well after showing any illegal card
|
|
9
|
Low Voltage Warning:
|
low Battery Voltage warning. (Lower than 3.5 V)
|
|
10
|
mortise
|
ANSI Standard mortise
|
|
11
|
Humidity
|
20%-90%
|
|
12
|
Working tempreture
|
-50°C-80°C
|
|
13
|
Suitable door
|
Wooden door, fire-proof door, metal door and so on.
|
1. Red light flashing two times with two “beeps”, it means the card is belong to other doors. Or when using the staff card-→opening times to open the lock and the times has already been used up, the red light will flash two times also.
2. Red light flashing three times with three “beeps”, it means the card time is not match with the lock time.
3. Red light flashing four times with four “beeps”, it means the lock haven’t been authorized.
4. Red light flashing five times with five “beeps”, it means the card has been suspended.
5. Red light flashing six times with six “beeps”, it means the lock is deadbolt working.
6. Red light flashing seven times with seven “beeps”, it means the lock was been blocked by the block card. In this case, only master card can open the lock.
7. Red light flashing eight times with eight “beeps”, it means the lock was authorized by the authorization card issued from another system. In this case, if you don’t know the code, you need to reauthorize the lock mandatorily. .

