Hammer Crusher Application
Hammer crusher issuitable for mid-hard and light erosive materials, whose pressure resistancestrength is no more than 100Mpa and humidity lower than 15%, such as coal, salt, chalk, gypsum, blocks, limestone, etc.
Hammer Crusher Operating Principle
The main working part of hammer crusher is rotors withhammer. The rotors consist of main shaft, disk, pin shaft and hammers. Themotor drives the rotors to rotate quickly in the crushing cavity. Raw materialsenter the crusher through the feed opening and are stricken, impacted, cut andground by the high-speed hammer to small size. There is a screening plate underthe rotor, so that materials with size smaller than the screen mesh will bescreened out and others are left to be further hammered and ground until reachthe standard size. The size of the final product can be adjusted by changingthe screening plate. The gap between the rotors and the screening plate canalso be adjusted according to different requirement.
The specification
|
Type
|
Max feeding size(mm)
|
Output size
(mm)
|
Capacity
(t/h)
|
Power
(kw)
|
Weight
(t)
|
|
PC400× 300
|
100
|
< 15
|
3-10
|
11
|
0.86
|
|
PC600× 400
|
120
|
< 15
|
8-15
|
18.5
|
1.55
|
|
PC800× 600
|
150
|
< 20
|
10-40
|
55
|
3.1
|
|
PC1000× 800
|
200
|
< 30
|
16-65
|
90
|
6.2
|
|
PC1000× 1000
|
300
|
< 40
|
30-90
|
110
|
8.8
|
|
PC1200× 1000
|
350
|
< 40
|
45-110
|
132
|
11.5
|
|
PC1250× 1250
|
350
|
< 40
|
65-140
|
185
|
17.9
|
|
PC1400× 1400
|
400
|
< 40
|
90-200
|
280
|
35.2
|
|
PC1600× 1600
|
400
|
< 40
|
150-300
|
480
|
41
|