Product Main

Specifications

Hammer Crusher Application
     Hammer crusher issuitable for mid-hard and light erosive materials, whose pressure resistancestrength is no more than 100Mpa and humidity lower than 15%, such as coal,salt, chalk, gypsum, blocks, limestone, etc.
 
Hammer Crusher Operating Principle
     The main working part of hammer crusher is rotors withhammer. The rotors consist of main shaft, disk, pin shaft and hammers. Themotor drives the rotors to rotate quickly in the crushing cavity. Raw materialsenter the crusher through the feed opening and are stricken, impacted, cut andground by the high-speed hammer to small size. There is a screening plate underthe rotor, so that materials with size smaller than the screen mesh will bescreened out and others are left to be further hammered and ground until reachthe standard size. The size of the final product can be adjusted by changingthe screening plate. The gap between the rotors and the screening plate canalso be adjusted according to different requirement.
 
 The specification
   Type
Max feeding size(mm)
Output size
(mm)
Capacity
(t/h)
Power
(kw)
Weight
(t)
PC400×300
100
<15
3-10
11
0.86
PC600×400
120
<15
8-15
18.5
1.55
PC800×600
150
<20
10-40
55
3.1
PC1000×800
200
<30
16-65
90
6.2
PC1000×1000
300
<40
30-90
110
8.8
PC1200×1000
350
<40
45-110
132
11.5
PC1250×1250
350
<40
65-140
185
17.9
PC1400×1400
400
<40
90-200
280
35.2
PC1600×1600
400
<40
150-300
480
41