Steel Cut Wire Shot
Size: 1.0mm, 1.5mm
Chemistry Composition:
C: 0.45-0.75%
Mn: 0.40-1.20%
Si: 0.10-0.30%
S: 0.04%max
P: 0.04%max
Average degree of hardness:
1.0mm: 51-53HRC (525-561HV)
1.5mm: 41-45HRC (388-436HV)
Degree of hardness deviation the anti-pulls strength:
1.0mm: 1750-2150Mpa
1.5mm: 1250-1450Mpa
Minimum density: 7.8g/cm3