Specification
1 high printing times
2 without any inpurites,
3 with good printing effect
4 low hardness...
printing most natural and synthetic fabrics, strong adhesive with silicone rubber products, including elastic fabrics for garments, Jerseys, Hats & caps, swim caps, Sweaters, Jackets, Gloves, Sleepwear, Pants & shorts, Bathing
Silicone ink for Characteristic:
1 high printing times
2 without any inpurites,
3 with good printing effect
4 low hardness...
Silicone ink for Application:
printing most natural and synthetic fabrics, strong adhesive with silicone rubber products, including elastic fabrics for garments, Jerseys, Hats & caps, swim caps, Sweaters, Jackets, Gloves, Sleepwear, Pants & shorts, Bathing
Silicone ink for Characteristic:
Easy and simply operation 10A: 1B with normal printing process
Catalyzed by platinum, no toxicity and non-corrosiveness
No solvent or cured by products
Non pollution environment, environment friendly silicone ink,
Non harm to human body. Caused by the organic solvent into environment friendly, in noxious ink
None cause environmental problems when test and destroy ester of silicone ink.
Silicon Ink with SGS approval, the silicone ink based on safety design easily pass any international inspection
Cured silicone in with high elastic, soft smooth hand feeling when touch, slippery, high stretchable and non bleeding
adhered on textile fiber well after being cured and forms elastomeric of silicone.
Good ink for silicone rubber products and latex with great adhesive.
Produce high tear strength, create high quality printing effect
Moderate fluidity and cure time application. Easy process
Low and higher temperature resistance (-50 to 300)
Special silicone elastomeric recovery capacity, flexibility, velvet, resistance to oil, solvent, and other etc,
no harm to human body caused by the organic solvent into environment friendly, in noxious ink
Prepare methods of silicone ink:
- Mixed Color master batch: Using it when needing various colors. Adding 0.2% of total amount material.
- Mixed 10% cattily yet curing agent into small amount of silicone ink(90%).
- The curing agent should be mixed very well. Otherwise, some parts won’ t be cured.
- Could used thinner for decrease the viscosity. Over 15% of thinner. The abrasiveness, durability and adhesion force will be reducing. There tested before production is required.