Produce features
■It has good two-way compatibility, strong cohesive force with base plane and paint primer.
■It is ready-mix product, has uniform and stable performance, can be used by opening and adding water and latex, convenient and environmental.
■It has good thixotropy, even and smooth, smooth construction, could improve the construction efficiency.
■It has excellent crack resistance and water resistance. Eliminate the cracking, sand buckleand peelingphenomenon which caused by traditional 107 glue + white cement.
■The leveling facing is exquisite, smooth; reduce the amount of painting and the comprehensive cost.
■It is non-toxic and harmless, no radiation, no irritating smell. It does not contain flammable erosionsubstances,convenient and safe. The good weather resistance ensures the shelf.
■Use the Renovation of exterior wall leveling putty, there is base plane without output, this reduce the cost and improve the construction efficiency.
Scope of application
■It is suitable for leveling of special rough inorganic plane outside the building, including mortar plaster, concrete, standard block, and brick and so on.
■Matching paint: water, oil paint, stone paint, and inorganic coatings
Treatment of base plane
■The base plane should be smooth and strong; no dust, grease, release agents, batik materials and so on.
■If the base place is very uneven, leveling it with powder putty for exterior wall for one time. The new plastered cement mortar surface should be maintained for more than 14 days before construction.
■If the weather is hot and dry or the porosity of base plane is high, construction should be done after water the base level and waiting until no clear water.
Construction technology
Stir with motor stirrer until even, standing for 5-10 minutes, and stir again will get better result.
|
Product name
|
YY-612 general
|
YY-622 general double component)
|
YY-625 strength double component
|
YY-626 srenew double component
|
YY-628 elastic waterproof
|
|
Mix the powder and water in the proportion
|
Powder:water=25:(5.5-6.5)
|
Powder:additives:water=25:2.5:(5-6)
|
Powder:additives:water=25:5:(2.5-3)
|
||
|
Construction tools
|
Container, motor stirrer, putty knife, spray and coating tool and grinding tool, etc.
|
||||
|
Construction time interval(hr)
|
>4
|
||||
|
Construction thickness(mm)
|
0.8-1.5
|
||||
Attentions
■The construction should be done from 5 ℃ to 40 ℃.
■Control strictly about putty proportion of water and powder, avoid appear product too loose, too low strength because of too much water; or product dry fast and too low strength because of too much powder.
■If adding too much water when stirring, should add more powders.
■The mortar should be used within 4 hours.
Storage period
Keep in dry and cold place, unopened powder is valid for 1 year, additives is valid for 6 months.
Keep in dry and cold place, unopened powder is valid for 1 year, additives is valid for 6 months.
Spec.
YY-622: 25kg/bag+2.5kg/barrel