JLR100 is EM ID card or EM compatible RFID card Long-distance reader, it incorporating RFID technology and can automatically identify the proximity card objective and obtain the relative data through radio frequency signal and need not the manual interference. It can be used in various environment and widely applied. It read normal EM card at range 30-40 cm and 80-100cm for enhanced EM card
Specification of Long Distance EM card reader
Wiring:
Red: Power 12V
Black: Power ground
Green: Wiegand output D0
White: Wiegand output D1
Black: Power ground
Green: Wiegand output D0
White: Wiegand output D1
Specification of Long Distance EM card reader
| Support EM4100 compatible ID card | |
| Model | JLR-100, Wiegand26 |
| Reader range | 80-120cm |
| Frequency | 122-128KHz |
| Support card | EM and EM compatible |
| Response time | 0.2S ( Typ ) |
| Operation temperature | -30 C to +60 C |
| operation humidity | 5%-95% relative humidity non-condensing |
| Input Power | 12DCV |
| Working current | <300mA |
| Dimension | 240W x235H x 35D ( mm ) |
| Weight | 2gram |
Beeper Function: Power up the reader, the beeper will activate 1 time. When a RFID proximity card is presented to the reader, a short beep will be emitted. This indicates that the card was read properly by the reader