JMDM-32DIOMR 16 Input 16Output Single Chip I/O Industrial Controller Instructions
1. Introductions
JMDM-32DIOMR is independently research and development by Shenzhen jingmin digital machine Co.,Ltd. With 16 channel optoelectronic isolation digital signal input and 16 channel relay dital output .Use single chip control input and output,also called 32 point single chip I/O industrial control.
1). Independent control mode: KEIL C environment programmed on the computer, after downloading to the controller through RS232 serial line, the controller away from the computer, independently controlled according to the procedures, realized the input and output of the logic control and accurate time control.
2).PC serial port monitoring mode: Running on the host computer serial port control software of the computer, you can send commands(character strings or ASCII code) through the computer serial port, real-time controlling 20-channel input and 20 –channel relay ( transistor ) output status, control or read the input state data of the input point .
Has a very wide range of applications in various of civil and industrial occasions, with the characteristics of resist the strong electromagnetic interference, lightning, stable and reliable Such as they can connect photoelectric, capacitive, inductive, Hall-type and various sensors and input switch, which can be accessed to capture and display the status of the switch input; controllable cylinders, solenoid valves, relays, heating wire, general motors, light bulb, the power switch and various load’s on-and-off . They are applicable to a variety of harsh environments industrial and civil occasions with excellent performance and cost-effective to win the respected and affection of our customers.
2. Performance parameters
1). Working power: DC12V - 24V 1A, AC 9V- 18V 1A,Stabilize and reliable.
2). 8 high performance single chip controller:
Programme storage space:32K, data storage space:29K,data memory used to store data, the data will not lost after power failure.
3). Two kinds of communication interface: A RS232 and MAX485 interface share a 9 pin D type port. Can be used to upload programme and upper computer communication, remote sending signal.
4). I/O:
16 channel optoelectronic isolation digital input: the input voltage range is DC 12 v ~ 24 v; Also can be customized for 5 v (before buying Special instructions), the input current is 5 ~ 10MA; Can be used to detect the external sensor input signals, such as photoelectric sensor,Infrared sensors, hall sensors, proximity switches, inching switch and so on digital quantity input devices, etc; Digital work instructions lamp: every road digital quantity input has an indicator light, convenient observation input point working state;
16 channel relay output: passive dry contact form, can be directly control:AC 0 ~ 220V , DC: 0 ~ 30 v ; Every channel with 8A maximum output current, output status can be read back;
5), program download instructions: good connection between computer and controller serial communication line. Will use on STC - ISP download software compiled HEX file downloaded to the controller. (note: the download process there is a manual process of power and electricity). ;
6), system stability: with industrial-grade lightning protection, strong resistance to electromagnetic interference, high reliability, no crash phenomenon. Relay output by high frequency filter circuit, produce minimal harmonic; The system has high stability and long service life;
7), speech writing three works: support independent control (according to the KEIL C language program logic control), and RS232 serial port monitor (write a machine program) of the upper and lower two ways;
8), shell size:
Circuit board size: length x width x height: 147.5 mm x 104.57 mm x 2.8 mm.
Shell size: length x width x height: 155 mm x 135 mm x 60 mm.
3. Specification
1), the working temperature: - 10 ~ + 65 ° C;
2). Storage temperature: - 20 ~ + 80 ° C;
3), humidity: 5 ~ 95% without condensation;
4), power consumption (no external devices) : @ 1 a + 12 v (typical);
4. hardware connection points for attention
1). JMDM -32 DIOMR the power part adopts DC 12 ~ 24 v 1A or AC 9 ~ 18 v 1A power supply.
2), customer control panel will be in strict accordance with the wiring diagram wiring all finished, and after checked, then can connect the power supply. Otherwise will burn out or external input/output devices such as controller.
3), the controller input signal is by default the external DC 12 or 24V power supply.
5. Use
1). used in wiring inconvenience for cable industry scene or other applications of intelligent control.
2). used in circuit on-off testing, the line quality test.
3), can control 16 channel quantity input signals, and a 16 channel output load at the same time, such as photoelectric switch , the infrared probe, close to the switch, trip switch, button input, etc.; AC 0 ~ 220 v or dc 0 ~ 30 v range within the scope of executive components such as AC contactor, cylinders, solenoid valves, relays, heating wire, general motors, light bulb, LED lamp series, general motors, such as the output load on and off;
4), remote real-time detection and control of power plant to a serial port, such as automatic flower shop production site, the remote machine room equipment, lighting,power supply, audio, video, electronic entrance guard and off, save labor, save the human cost of manual operation;
5), can be used in the centralized control building, advertising, the arena of gymnasium such as lighting, audio and other multimedia devices, intelligent control home appliances
switch, etc.
6), can be used for computer control all kinds of peripheral photoelectric switch, the infrared probe, button signal, the device switch;
7), for a variety of distributed control system, remote I/O module, remote control system;
8), can be used for small sand table, buildings, Bridges and other models of light control.
6. Shipping information
1). Delivery list: controller, programming download line, electronic version of the product information.
Independent controls the electronic version of the product information: KeilC software and tutorial, STC-ISP download software, product information (example procedure, instructions and wiring diagram).
2). Delivery way: express delivery, packing standard: anti-static and shock-proof carton.
7. After-sales service
1),Since the date of the product sold under the normal use of the hardware failure, one year warranty, repair cost is charged only after the warranty period. Due to natural forces and man-made damage, failure to use of the use, inappropriate operation, overhaul, or beyond the scope of abuse, such as caused by the failure, not covered under warranty
2),Technical support: Provide remote telephone, network online technical support.