we supply all kinds of injection molding machines, the clamp force ranges from small to large, 250KN to 30000KN.
Main parameters of 168T injection molding machine as below;

Parameter	Unit	Parameter Value (SSF1680-K5)
Screw diameter	mm	A	B	C
		42	45	50
Screw L/D ratio	L/D	23.6	22	19.8
shot volumn (theoretical)	Cm3	311	357	441
injection weight(PS)	g	283	325	402
plasticizing capacity	g/s	10	11.5	14.2
injection rate	g/s	138	160	196
injection pressure	Mpa	203	177	143
screw speed	rmp	180
clamp force	KN	1680
open stroke	mm	435
distance between tie bars (W*H)	mm	460*460
max mould thickness	mm	520
min mould thickness	mm	180
ejector stroke	mm	135
ejector force	KN	50
ejector number	PC	5
dia of mould location hole	mm	125
max pump pressure	Mpa	16
pump motor power	KW	18.5
heating power	KW	12.3
machine dimension	m	5.13*1.45*2.12
machine weight	T	6
oil tank capacity	L	300