Ⅰ. Introduction
GD-265D-1 Kinematic Viscosity Bath for Petroleum Products is designed and made as per the National Standard GB/T265 Test Methods for Kinematic Viscosity of Petroleum Products and Calculation of Dynamic Viscosity.
This kinematic viscosity bath is suitable to determine kinematic viscosity of liquid petroleum Products (Newton liquid) at a certain temperature. It is also in accord with requirements of SY/T 5651 Technical Condition for Petroleum Products Kinematic Viscosity Tester.
Ⅱ. Characteristics
1. This kinematic viscosity bath is mounted with digital temperature controller
2. The temperature controlling precision is up to ±0.01°C.
3. The testing bath is made of hard glass, equiped with electric stiriing device, that can keep the equilibrium temperature in the bath.
4. Two bases, inner and outer bath, could keep a good heating reservation.
Ⅲ. Technical parameters
1. Power supply: AC220±10%, 50 Hz;
2. Heating power:
(1) Auxiliary heating: 1000 W
(2) Temperature controlling: 650 W;
3. Stirring motor: 6 W, 1200 RPM;
4. Temperature range: ambient temperature~100°C;
5. Temperature controlling accuracy: ±0.01°C;
6. Constant temperature water bath: 20 L, two layer bath;
7. Ambient temperature: -10°C~+35°C;
8. Relative humidity: <85%.
9. Timing device: 0.1s ~999.9 s, resolution is o.1 s.
10. Capillary viscometer: 7 pieces in a group; Inner diameters of them are 0.6, 0.8, 1.0, 1.2, 1.5, 2.0, 2.5 mm respectively.