1. Power on: Short press the power Key, Red & Blue light both on. After booting successfully, blue light shut down red light in flashing. The device in standard mode.

2. Record: In standard mode, short press the power key red light flash 3 times then shut down. Successfully get into record mode. Short press the power key, red light on device stop recording back to standard mode. The device save the file after 5mins, in this way keep the file well. Marks: The device with circle record function, pls save the video file to PC as needed.

 

3. Photo: In standard mode, short press the photo key, Red light flash one time shows a photo saved successfully. After photo the red light on  back to standard mode.

4.Motion Detection: In standard mode, long press the photo key get into  motion detection mode. two indicateor light flash 3 times then shut down. Under motion detection, the device begin record when something move inside recording area. After object move outside, device stop recording. Motion detection mode can save more memory capacity. marks: The device with circle record function, pls save the video file to PC as needed.

 

Special Marks:

A. In record & voice record mode, screw the mic cap for a clear sound.

B. The device can not get the sound under waterproof function.

5:Mobile disk

       Use the USB cord to connect the machine to your computer USB socketà computer shows the disk, you can also go to “my computer” to find the diskà when your computer is successfully connected to the disk, the machine starts functioning as a mobile drive already, you can read, convey, copy or delete files from the drive.

       File saving path of the machine is: Drive\_ DCIM\100DSCIM.

       To unload the drive from your computer: find the drive on your computer by clicking the drive sign on RHF of the screenà pull out the USB cord and disconnect it when your computer says it is safe to remove the drive.

NOTICE: Due to difference of computer configuration, the time for a computer to read the machine may differ, please take a little patience not to operate the machine when the computer is trying to read the drive. If the machine can not be detected by the computer after a suspicious long time, pull out the cord and reconnect it. If it still fails to be detected, please check and confirm if your operation system, drive program, USB socket, connecting cord are functioning well.

To avoid causing damage to the machine or computer, please connect and unload the machine strictly according to the instruction: Connecting the machine with USB cord, then plug it in the computer USB socket. When unloading, remove the USB cord from the computer only when the computer says “it is safe to remove the drive now”, then remove the cord from the machine.

 

6. Internet camera function

First of all, you need to install the camera drive program on your computer: Put the CD disk drive (packed with the machine) in your computer CD driverà run the file STK02N 2.4.exe to install the camera drive programà when installing finishes, power on the machine, and link it to computer with a USB cordà press the CAMERA button, the machine goes to PC CAMERA modeà you can video chat with your friends, or take pictures, etc.

       How to use webcam: double click “my computer” driveà click “turn on webcam (NOTE: only when the machine is powered on before it’s connected to computer, can the webcam function be activated)”.

       To avoid causing damage to the machine or computer, please connect and unload the machine strictly according to the instruction: Connecting the machine with USB cord, then plug it in the computer USB socket. When unloading, remove the USB cord from the computer only when the computer says “it is safe to remove the drive now”, then remove the cord from the machine.

 

7. Charging

       Just connect the machine with a USB cord to the computer or charger. When it’s on charging mode, the red light blinks until the battery is fully charged, and then the red light goes off. TIP: this machine is built with a high capacity Polymer Lithium Ion Battery, which is not memory effecting, therefore technically it can be charged at any time. However, it is recommended to drain the power before charging it for the first 5 times, as to achieve the maximum power storage. It is also recommended to continue charging for 30 to 60 minutes when the red light indicates charging is finished.

       To avoid causing damage to the machine or computer, please connect and unload the machine strictly according to the instruction: Connecting the machine with USB cord, then plug it in the computer USB socket. When unloading, remove the USB cord from the computer only when the computer says “it is safe to remove the drive now”, then remove the cord from the machine.