Specifications
OEM t8 To t5:
1.energy saving 59%
2.factory directly price
3.2ys warranty 20000H lifespan
4.CE&RoHS approved OEM t8 To t5
1.energy saving 59%
2.factory directly price
3.2ys warranty 20000H lifespan
4.CE&RoHS approved OEM t8 To t5
OEM t8 To t5
Describution of power saver:
The patent product composition: light source, control board, adapter, glass tube, Nanometer reflector and connecting line:
1.Control panel make up by two parts (the left and the right one) which installed in adapter at two
ends, connect with wire.
2.A adapter by two parts buckle together, open and rotating 90 degrees then tightening, which can
transform the horizontal and vertical lamp holder.
3.Due to adapter's unique design, this product can be install nonstandard tube, also can install
standard tube.
4.Fluorescent tube install in glass tube, lighting source positioning through the both ends of
adapter; with the Nano meter reflective in the glass tube, so better reflective effect.
5.The connect of copper needles at the both end and control panel; tube and control panel; left
and right .
6.control panel are use plugin connection method; The assembling of product, replacement of control
panel or tube are very convenient. Reducing production of artificial and product failure rate in
large extent.
7.TITL energy- saving lamp adapter make use of ABS plastic raw materials, and explosion-proof, lead- free glass tube ,safe and environment friendly.
8.TITL integration lamp at the basic of the "new energysaving lamp” , let the power line set in one
end of the lamp, through socket line circumscribed power, use stainless steel clip installation fixed,
can adjust illumination angle used for new engineering project lighting.
Feature of power saver:
1.Material: light source, control board, adapter, glass tube, Nanomater reflector and connecting line.
2.A adapter by two parts buckle together, open and rotating 90 degrees then tightening, which can
transform the horizontal and vertical holder.
3.Surface: Both of the adaper corner place and the cylinder surface are opened ventination hole, it's
better for circuit board heat dissipation.
4.Factory direct price
5.High efficiency,Long lifespan
6.Power factor: 0.95
Adapter of power saver:
1.A adaptor by two parts buckle together, open and rotating 90 degrees then tightening, which can
transform the horizontal and vertical holder.
2.Due to the adapters unique design, this product can be installed non-standed tube, also can installed standerd tube
3.TITL color Temperature :6400K(day light), 4200K(warm white) and 2700K(yellow),If no special requirement in order Usually produce with white color (6400K)
Packing of power saver:
- 5 feet - 1554*300*300mm (36pcs/ctn)
- 4 feet - 1254*300*300mm (36 pcs/ctn)
- 3 feet - 954*300*300 mm (36pcs/ctn )
- 2 feet - 654*300*300mm (36pcs/ctn)