D1TE Paste Tile adhesive
D1TE Tile adhesive is formulated with an advanced acrylic polymer technology. This adhesive is paste, can use directly.
Product features
1. Easy operation
2. Has high bond strength.
3. Has strong water retention.
4. Being premixed that can use directly.
5. Has good flexibility to withstand shock and vibration.
6. Has special formula to reduce material consumption and building load.
7. It is non-toxic, non-flammable, non-radiation, non smell and environmental.
Scope of application
|
D1TE
|
It is suitable to fix various small tiles and mosaic onto conventional substrates, precast concrete panels, concrete, cement renders/screeds. Both on wall and floor in interior or exterior.
|
Treatment of base plane
1. Base plane should be smooth and firm, no dust, grease, release agents, batik material, etc.
2. Check base plane roughness by 2m ruler, error should be less than 5mm.
3. New plastering cement mortar should be constructed after 14 days maintenances.
Construction technology
▲Construction tools: leveling instrument, dentiform drawknife (3 x 3mm, 4 x4mm, 6×6mm, 8×8mm, 10 x10mm), tile generator, motor stirrer, big drum, cross-colloidal.
▲Lay-up construction: scrape the glue paste evenly on base plane with dentiform drawknife, the area should be about 1 m ² each time, then knead and press on the base plane. The model of the dentiform drawknife depends on the size of the tiles.
Attentions
1. The vertical and smoothness of the substrate must be confirmed before construction.
2. The product is suitable for construction in the 5-40℃.
3. Don’t use the dried paste by re-adding water.
4. If the base plane is uneven or the back of tile is not smooth, wiping the paste on the back of brick in order to ensure it full with paste to avoid hollowing.
|
Use level list
|
||
|
Tile size
|
Drawknife size
|
Use level(kg/sqm)
|
|
10x10cm tile or mosaic or below
|
6x6mm tooth form for base
|
3-4
|
|
60x60cm tile and stone or below
|
8x8mm tooth form for base
|
4.5-6
|
|
60x60cm tile and stone or above
|
10x10mm tooth form for base
|
6-8
|
|
60x60cm tile and stone or below, with deep groove
|
8x8mm tooth form for base
3x3mm tooth form for tile back
|
6-8
|
|
60x60cm tile and stone or above, with deep groove
|
10x10mm tooth form for base
3x3mm tooth form for tile back
|
8-12
|
Storage period
Keep in a cool and dry place, unopened powder valid for one year.
Spec: 7/kg/barrel or 20kg/barrel
Technical parameters
|
Original tensile adhesive strength(Mpa)
|
≥0.5
|
|
Tensile adhesive strength after water(Mpa)
|
≥0.5
|
|
Tensile adhesive strength after thermal aging(Mpa)
|
≥0.5
|
|
Tensile adhesive strength after standing for 20 min(Mpa)
|
≥0.5
|