Product Main

Specifications

Bonding agent(on calcium silicate board )
The bonding agent effectively seal isolation layer, make the base plane and putty have better adhesion. Avoid the common phenomenon of putty detaching and peeling when it absorbs water and becomes dry, as the water absorption is quite different between plywood and calcium silicate board.
 
Product features
■This product is a two-component, water-based high environmental protection products.
■Easy to form membrane and have high bond strength, good sealing ability .
■The surface is so rough that can make the board and putty stick much firmly.
■It is non-toxic and harmless, convenience and safe.
■Especially design for high-class interior finish, star class decoration and high-class construction..
 
Scope of application
■It is suitable for smooth surface and flat construction baseplane.
■It is suitable for wooden board, calcium silicate board, concrete and other place which putty is not easy to cohere.
■It can be use to base material with damp, yellowing, contraction.
 
Treatment of base plane
■The base place should be smooth and strong, no dust, grease, release agents and batik materials, etc.
■If the base plane is very uneven, leveling it with powder putty for exterior wall for one time.
The new plastered cement mortar surface should be maintained for more than 14 days before construction.
■If the weather is too dry and hot, or the porosity of base plane is high, water the base plane and start construction after no clear water.
 
Attention
■This product is forbidden to eat, If touch the eyes or sensitive parts of the body, should  clean immediately with water and see the doctor.
■The product is strictly forbidden to use on the powder layer, if there are gaps please brush the gap after clearing the gap.
■If you would like the products reach the best effect, please buy a good matching decorative putty or coatings
■This product it is forbidden to use diluted with water or other liquids.
■This product should be in ventilated, avoid light, dry storage places, And at room temperature for 5 ~ 35 ℃, Past expiry date, it can still use after inspection qualified. If the temperature is below 5 ℃, it can’t construction.
  
Spec
25kgs powder+12.5kgs additives
9kgs/barrel (6kgs powder+3kgs additives)