GSM Power facility alarm system adapts SMS data transmission and voice platform to complete intelligent alarming data transmission and controlling.This system is mainly applied to power equipment like power line.transformer and anti-cut,anti-burglar of some lines.The alarm host is sealed die-casting aluminum with good waterproof,good quality,stable and reliable.It is widely used in the security protection of outdoor power equipment.This alarm can be used independently,can also be used with alarm center network.
Main function:
1. Applied in the security of power transformers, transmission lines, and municipal
street lines.
2. Monitor three-phase loss voltage and single phase failure of the distribution network
3. With IR night vision.
4. Automatically send SMS, MMS, and E-mails when alarming
5. Support two-way communication.
5. Support taking pictures, can monitor the site remotely at any time.
6. Support fire alarm, emergency alarm and other types of alarm.
7. With 8 wired inputs (can work with vibration sensor, balance bolt and other detectors.)
8. With tamper, shock-proof function.
9. Compatible with Patrol Hawk PH-BC110 alarm monitoring center software.
Technical Parameter:
Communications mode:Support 850/900/1800/1900MHz GSM frequency
Alarm mode:GSM SMS and voice dialing(detailed parameters refer"X2"
Alarm response time:<=8 seconds(normal GSM signal)
Standby power consumption:<=0.6W
Siren volume:More than 110db
Electric power network connect mode:Y(three phase four wire system)
Phase-Neutral rated work voltage:AC220V
Phase-Neutral lowest work voltage:AC110V
Phase-Neutral highest work voltage:AC270V
Biggest capacity of insurance thbe:5A
Standby battery:DC7.2V/800AH(lead acid battery)
DC7.5v/800AH(NI-MH battery)
Anti-electromagnetic interference:IEC55022
Insulation level:grade B
Protection level:IP55
Working conditions:Temperature:-10C to +55C
Humidity:<=95% non-condensing
Humidity:<=95% non-condensing
Appearance:Aluminum die-casting,hermetically sealed
Dimension:310(L)*170(W)*115(H)mm