JetConvectionTM-Convection Heating
JetConvectionTM-Convection Heating plays main role during glass heating. After being heated in JetConvection chamber, the hot air inside heating furnace is blown onto glass surfaces and then goes back to hot air blowers for continuous circulation, which not only ensure even heating, low production costs, but enhance the quality of the end products as well.
JetConvectionTM-Convection Heating plays main role during glass heating. After being heated in JetConvection chamber, the hot air inside heating furnace is blown onto glass surfaces and then goes back to hot air blowers for continuous circulation, which not only ensure even heating, low production costs, but enhance the quality of the end products as well.
LD-A JetConvectionTM Flat Tempering Furnace
a. LD-A JetConvectionTM Flat Tempering Furnace adopts JetConvection heating technology and it can temper glass with best quality.
b. Glass can be tempered including online and off-line Low-E (E=0.02) glass, extra white glass, screen printed glass, patterned glass, tinted glass and clear glass, etc.
b. Glass can be tempered including online and off-line Low-E (E=0.02) glass, extra white glass, screen printed glass, patterned glass, tinted glass and clear glass, etc.
AirStreamTM-Radiation Heating
AirStreamTM-Radiation heating plays main role during glass heating, while compressed air is injected into heating furnace, in which it brings certain amount of heat onto glass top surfaces and is helpful for even heating online Low-E glass, etc. SuperAirTM-Radiation heating plays main role during glass heating, while larger volume of compressed air is blown into heating furnace by intelligent pipe convection system. Therefore, both online and off-line Low-E glass can be evenly heated.
LD-A AirStreamTM Flat Tempering Furnace
a. LD-A AirStreamTM flat tempering furnace adopts AirStream heating technology; it is suitable for tempering flat glass for architecture and furniture.
b. Glass can be tempered including on-line Low-E glass, ultra clear glass, silk-printed glass, patterned glass, tinted glass and clear glass, etc.
Technical Specifications
LD-A AirStream Flat Tempering Furnace | |||||
Model |
Max.
Dimension (mm)
|
Min.
Dimension (mm)
|
Glass
Thickness (mm)
|
Procuctivity (Loads/Hour) |
Installed
capacity (kVA)
|
A1830 | 1800X3000 | 150X300 | 4-19 | 15 | 500 |
A1836 | 1800X3600 | 150X300 | 4-19 | 15 | 630 |
A1842 | 1800X4200 | 150X300 | 4-19 | 15 | 630 |
A2030 | 2000X3000 | 150X350 | 4-19 | 15 | 500 |
A2036 | 2000X3600 | 150X350 | 4-19 | 15 | 630 |
A2436 | 2440X3600 | 150X350 | 4-19 | 15 | 800 |
A2442 | 2440X4200 | 150X350 | 4-19 | 15 | 1000 |
A2450 | 2440X5000 | 150X350 | 4-19 | 15 | 1000 |
A2460 | 2440X6000 | 150X350 | 4-19 | 15 | 1250 |
A2480 | 2440X8000 | 150X350 | 4-19 | 15 | 1600 |
A2880 | 2800X8000 | 200X350 | 4-22 | 15 | 1600 |
A3050 | 3000X5000 | 300X350 | 5-22 | 15 | 1600 |
A3080 | 3000X8000 | 300X350 | 5-22 | 15 | 2000 |
A3250 | 3200X5000 | 300X350 | 5-22 | 15 | 1600 |
Productivity is calculated on 5mm clear glass with 65% loadage. Actual productivity is subject to glass types, sizes and loadage.
technical features
much longer heating section and tempering section ensure that the glass sheets can be heated in heating section to right temperature and theen tempered, cooled quickly without oscillation;
flexible driving speed control for different glass heating stage;logic servo controlled continuous mode and complete continuous mode can be switched between for large or small size glass sheets;
continuons running blowers ensure energy saving;glass needn't oscillate inside heating section, which reduces quality defects such as:white haze, scratches, waviness,etc;
continuous tempering technology, much higher productivity;suitable for tempering large volumes flat glass sheets for architectures, furniture, household appliances, autos and solar power industries;
equipped with jet heating convection system,it can temper on-line and off-line low-e glass, extra white glass, screen printed glass, pattern glass, tinted glass, clear glass.etc