Fence size: 200 mm x 50 mm x 2.5 Meters x from 630mm - 2630mm or available on request. Wire diameter and tolerances
- Core diameter of the horizontal galvanized wires: 4.30 ± 0.06 mm.
- Core diameter of the vertical galvanized wires: 4.30 ± 0.06 mm.
- Diameter of PVC-coated horizontal galvanized wires: 5.00 ± 0.20mm.
- Diameter of PVC-coated vertical galvanized wires: 5.00 ± 0.20mm.
The tolerances are in accordance with EN 10218-2.
3.2 Tensile strength of the wire
Vertical wires: 400 to 600 N/mm².
Horizontal wires: 400 to 600 N/mm².
Vertical wires: 400 to 600 N/mm².
Horizontal wires: 400 to 600 N/mm².
3.3 Mesh sizes and tolerances
Mesh spacing is measured between the centres of two neighbouring wires:
Mesh spacing is measured between the centres of two neighbouring wires:
- Distance between the horizontal wires : 200 ± 4,0mm,
- Distance between the vertical wires : 50 ± 3,0mm.
The tolerances are in accordance with EN 10223-7.
3.4 Welding strength
The average weld shear strength of 4 welds taken at random shall not be less than 50% of the breaking strength of the vertical wire (in accordance with EN 10223-7).
The average weld shear strength of 4 welds taken at random shall not be less than 50% of the breaking strength of the vertical wire (in accordance with EN 10223-7).
Post:
This system usually choose Square Post (50*50mm, 60*60mm), Rectangular Post (80*60*2.5mm, 120*60*3mm), with the high strength and so on. With plastic caps or Roofing rainhat.The finished surface usually is Galvanized and Powder coating, or alternatively.
This system usually choose Square Post (50*50mm, 60*60mm), Rectangular Post (80*60*2.5mm, 120*60*3mm), with the high strength and so on. With plastic caps or Roofing rainhat.The finished surface usually is Galvanized and Powder coating, or alternatively.
Fastenings:
The panels and posts are jointed together with bolts or rivets, using the steel flat bar, or special steel clamps, all nuts are self-locking.This also can be designed as the special clients requests.
The panels and posts are jointed together with bolts or rivets, using the steel flat bar, or special steel clamps, all nuts are self-locking.This also can be designed as the special clients requests.
Easy installation
- Erected into the ground directly: at first, concrete pile is made well and when installation, the post and wire mesh should be installated synchronously and then adjusted for a line to pour concrete finally. The way of installation is so easy that need not any fixed parts.
- A mounting flange: The base should be finished in advance according to the drawing sheet before installation. Then these bases are even and the distance of each one is the same. Post can be erected onto the ground with flange in a way of welding or connecting bolt.
Application:
Boundary and anti intruder
Stand and finish:
Galvanized / Polyester coated green
other standard colors available on request
Boundary and anti intruder
Stand and finish:
Galvanized / Polyester coated green
other standard colors available on request