Support Rollers
Support rollers are the kind of gears which provide support to cable and other related parts.
Support rollers are used to muffle vibration noise and are driven to rotate by friction between the roller surface and the web.
Support rollers are used as an important component in conveyors, elevators, rollers etc.
We manufacture and export a wide range of custom made support roller which provide support to cable and other related products.
Support rollers are manufactured using precision and enhanced technology.
Support rollers are the kind of gears which provide support to cable and other related parts.
Support rollers are used to muffle vibration noise and are driven to rotate by friction between the roller surface and the web.
Support rollers are used as an important component in conveyors, elevators, rollers etc.
We manufacture and export a wide range of custom made support roller which provide support to cable and other related products.
Support rollers are manufactured using precision and enhanced technology.
Material:Carbon steel,
low alloy steel:ZG20SiMn,ZG50Mn,ZG35SiMn,ZG35CrMo,ZG35SiMnMo,
ZG42CrMo,ZG40Cr,ZG34CrNiMo,ZG40Mn and so on.
ZG42CrMo,ZG40Cr,ZG34CrNiMo,ZG40Mn and so on.
Process:Place a pattern in sand to create a mold;
Incorporate a gating system;
Remove the pattern;Fill the mold cavity with molten metal;
Allow the metal to cool;
Break away the sand mold and remove the casting.
Incorporate a gating system;
Remove the pattern;Fill the mold cavity with molten metal;
Allow the metal to cool;
Break away the sand mold and remove the casting.
Standard&certificate:ASTM,BS,NF,DIN,JIS and so on;
ISO 9001:2000;BV,CCS,DNV,NK,RINA,KR and so on.
Weight:from 3 tons to 120 tons per piece
Weight:from 3 tons to 120 tons per piece
Application:
The products can be widely used in the area of cement mill,rotary kiln,shipbuilding,
metallurgy,mine,sugar mill,powder plant,rail road,engine bed and so on.
The products can be widely used in the area of cement mill,rotary kiln,shipbuilding,
metallurgy,mine,sugar mill,powder plant,rail road,engine bed and so on.
We can provide OEM service for cement mill and rotary kiln casting parts,marine steel casting parts,sugar mill machinery parts with carbon steel or low alloy steel.
The casting parts can be supplied as following treatment:
Heat Treatment: Normalized, normalized and tempered,quench and tempered
Machining: Rough machined,semi-finished machined,finished machined
The casting parts can be supplied as following treatment:
Heat Treatment: Normalized, normalized and tempered,quench and tempered
Machining: Rough machined,semi-finished machined,finished machined
Quality warranty and testing equipment:
Magnetic powder inspection
UT nondestructive test
Dye inspection
Leeb hardness testing equipment
Machinery performance testing equipment
Metallographic microscope
Direct-reading spectrometer
Magnetic powder inspection
UT nondestructive test
Dye inspection
Leeb hardness testing equipment
Machinery performance testing equipment
Metallographic microscope
Direct-reading spectrometer
Features of our products:
Durable
Excellent tensile strength
Accurate level of tolerance
Resistance to corrosion
Resistance to extreme temperature conditions
Good dimensional accuracy
Superb surface finishing
Easy to use and install
Durable
Excellent tensile strength
Accurate level of tolerance
Resistance to corrosion
Resistance to extreme temperature conditions
Good dimensional accuracy
Superb surface finishing
Easy to use and install
Possible defects:
|
Defect
|
Causes
|
|
Unfilled sections
|
Insufficient material
Low pouring temperature
|
|
Porosity
|
Melt temperature is too high
Non-uniform cooling rate
Sand has low permeability
|
|
Hot tearing
|
Non-uniform cooling rate
|
|
Surface projections
|
Erosion of sand mold interior
A crack in the sand mold
Mold halves shift
|
There are no these problems for us.
Uniform wall thickness will ensure uniform cooling and reduce defects.
A thick section, often referred to as a hot spot, causes uneven cooling and can result in shrinkage, porosity, or cracking.
Uniform wall thickness will ensure uniform cooling and reduce defects.
A thick section, often referred to as a hot spot, causes uneven cooling and can result in shrinkage, porosity, or cracking.
Corners
Round corners to reduce stress concentrations and fracture
Inner radius should be at least the thickness of the walls
Round corners to reduce stress concentrations and fracture
Inner radius should be at least the thickness of the walls
Machining allowance
Add 0.0625 - 0.25 in. (0.16 - 0.64 mm) to part dimensions to allow for machining to obtain a smooth surface.
Add 0.0625 - 0.25 in. (0.16 - 0.64 mm) to part dimensions to allow for machining to obtain a smooth surface.