raw materials
The product mainly makes use of flue gas desulfurization gypsum and ardealite ,which is made by casting with special purpose mould.the environmental and light-weight wall partition block belongs to high-quality product.
the construction department’s standard is more than or equal to 1.5,the product certificated is more than or equal to 1.9-4.2,the breaking load is more than 2-3 times than ‘JC/T698-1998’ issued by the construction department of China.we choose green and environmental special purpose adhesives between blocks in installing.
light weight
The new light weight block of 666mm×500m×120mm produced by our company is less than 15 kilogram per one,which is lower than the national standard by 30 kilogram/per block,it reduces the load of the wall to the buildings itself,which is suitable to be installed in high-rise houses,large spots and office buildings etc.
Installing quickly
We can putty directly after finishing blocking the wall and drying the adhesive,not only does it save the material fee of the two sides and shorten the constructing time ,but relieve the workers’labor intensity. The building blocks can be cut directly and randomly by saw when we use them,the cut is uniforming ,and it reduces the constructing cost.it improves the hard of block at 100mm, 120mm, 180mm, 200mm,therefore,using building block to be the interior wall can widen the indoor construction area.
The building block‘s ingredient is special ,adding the heat preservation material ,even cylindrical hole exists in the interior side,which can do good to be sound insulation , heat preservation, regulating the indoor temperature,and meets the national standard of GB6566-2001 ,the construction material radiation limited standard.
the product features
1)The junction surface’s roughness( RA)should not be lowering 3.2 in the structure of gypsum block forming mould.
2)the roughness(Ra) of working surface among the forming machine mould , the evacuating pipe and the material contact surface should not be lowering 1.6,our company has achieved 1.6-0.8 and has exceeded the national standard.
3)We choose hard chromium plating as the aseptic technic,which is not easy to rust and helps lengthening the service life.
4)We choose leakproof structure so as to keep not leaking the liquid and avoid producing hard friction with the working surface,and lengthen the service life as well.
4)We choose leakproof structure so as to keep not leaking the liquid and avoid producing hard friction with the working surface,and lengthen the service life as well.