We produce: CNC Brass Wire Cut Machine, Brass Wire Cut Machine, CNC Brass Wire Cut Machine, Low speed wire cut machine, CNC EDM machine,

A. Control axis: Numerical control of X, y, u, V, z and X, y, u, V four axis simultaneous control;
B. Min. Setting 0.001mm or 0.0001 inch
C. Min. Moving distance: 0.001mm
D. Code adopted: ISO code
E. Instruction sending: Relative mode (incremental mode), absolute mode
F. Backlash gap compensation: 0-10um(X, Y, U, V and Z axis)
G. Pitch compensation: X and Y axis
H. Absolute zero point: X and Y axis
I. Wire compensation: 0-0.999mm
J. Moving mode: Speed-adjustable fixed-distance/fixed-point moving, manual moving
K. Automatic alignment, automatic center determination and automatic return-to-vertical position
L. Machining-state display: Automatic tracking of machining path, synchro display of speed and time
M. Setting of parameter: Automatic file selecting, manual modify on screen
N. Short circuit: Automatic retreating
O. Wire breaking: Will be resumed at the wire-breaking point or a specified reference point, AWT(option)
P. Interruption of machining: The machining can be resumed after it is interrupted manually
Q. Code: G code, M-code, T code
R. Power supply
1. Machining condition C-No: 000-999
2. Pulse width ON: 00-30
3. Pulse spacing OFF: 00-31
4. Machining current IP: 00-17
5. Auxiliary pulse width HP: 00-09
6. Auxiliary pulse spacing MA: 00-99
7. Servo standard SV: 00-31
8. Machining voltage V: 00-03
9. Servo speed SF: 00-09
10. Capacity C: 00-04
11. Wire speed WS: 00-15
12. Wire tension: WT: 00-15
I. The machining system for operating fluid
A. Conductivity: Automatically controlled in the preset range
B. Operating pressure: It can be set at high pressure or low pressure
C. Temperature: Manually preset, automatically kept at constant temperature
II. Power supply
A. Power source: 3-phase 380 50Hz
B. Power: <10kVA(including the consumption of machine)