CNC EDM Small Hole Drilling,edm sinker cnc EDM Small Hole Drilling
We produce: Hole Drilling EDM/Small Hole EDM Machine/EDM Hole Popper, Hole Drilling EDM, Hole Drilling Machine, EDM Hole Popper, CNC EDM Hole Popper,
CNC Drilling EDM Series
Precision servo motors on X, Y, Z axes provide excellent stability during drilling.
Provide linear slideway and ballscrew ensure very accurate movements.
NC program G-code and DXF files could be directly read; Automatically finds the start cutting point and begins a fine hole drilling process.
Drilling capacity from 0.3 mm to 3.0 mm diameter brass or copper electrode tubes.
Z axis auto reset and depth calculation.
The flushing medium used by this machine is distilled water - environment friendly.
Data could be input by USB, or transfer through RS232 transmission and network.
Direct and easy learning dialogue operation interface.
Provide linear slideway and ballscrew ensure very accurate movements.
NC program G-code and DXF files could be directly read; Automatically finds the start cutting point and begins a fine hole drilling process.
Drilling capacity from 0.3 mm to 3.0 mm diameter brass or copper electrode tubes.
Z axis auto reset and depth calculation.
The flushing medium used by this machine is distilled water - environment friendly.
Data could be input by USB, or transfer through RS232 transmission and network.
Direct and easy learning dialogue operation interface.
CNC Drilling EDM Series
Parameters Unit Model
DK703C-320 DK703C-430 DK703C-540
Travel X× Y× Z mm 300 X 200 X 280 400 X 300 X 280 500 X400 X 280
Worktable dimension mm 400× 300 500× 400 600× 500
Max. Workpiece weight kg 300
Max. Drilling depth mm 300
W-axis travel mm 200
Z-axis travel mm 280
Pump operating pressure Mpa 7.0
Max. Drilling speed mm/min 10-60
Electrode diameter mm Φ 0.3-Φ 3.0 (0.3, , 0.50 optional)
Dielectric unit capacity Liters 20× 2
Work tank mm 650× 490 750× 590 850× 690
Machine dimensions (W× D× H) mm 850× 755× 1850 960× 805× 1850 1060× 925× 1850
Machine floor area mm 1150× 1150 1150× 1150 1250× 1250
Total weight kg 550 650 800
Electrical supply
Standard power supply - 380V± 10%/50Hz/4kVA
Other supply - 200V-480V(on request)
Room condition - 15-30/40-80%
Generator & Control
Max. Machining current 30A
Technologies steel/copper/aluminum/carbide
Dielectric Water
Monitor LCD
NC axes X/Y/Z
Coordinate mode Incremental
Dimension (option) Metric & Inch
Min. Command mm 0.001
Max. Command mm ± 999.999
DK703C-320 DK703C-430 DK703C-540
Travel X× Y× Z mm 300 X 200 X 280 400 X 300 X 280 500 X400 X 280
Worktable dimension mm 400× 300 500× 400 600× 500
Max. Workpiece weight kg 300
Max. Drilling depth mm 300
W-axis travel mm 200
Z-axis travel mm 280
Pump operating pressure Mpa 7.0
Max. Drilling speed mm/min 10-60
Electrode diameter mm Φ 0.3-Φ 3.0 (0.3, , 0.50 optional)
Dielectric unit capacity Liters 20× 2
Work tank mm 650× 490 750× 590 850× 690
Machine dimensions (W× D× H) mm 850× 755× 1850 960× 805× 1850 1060× 925× 1850
Machine floor area mm 1150× 1150 1150× 1150 1250× 1250
Total weight kg 550 650 800
Electrical supply
Standard power supply - 380V± 10%/50Hz/4kVA
Other supply - 200V-480V(on request)
Room condition - 15-30/40-80%
Generator & Control
Max. Machining current 30A
Technologies steel/copper/aluminum/carbide
Dielectric Water
Monitor LCD
NC axes X/Y/Z
Coordinate mode Incremental
Dimension (option) Metric & Inch
Min. Command mm 0.001
Max. Command mm ± 999.999