JY-A02 silicon Phone Covers Making Machine
Brief Description of Phone Covers Making Machine:
Phone Covers Making Machine is a device through a dedicated hydraulic oil as the working medium, the hydraulic oil in the tank to complete a certain mechanical action as the productivity of a mechanical cycle cylinder / piston cycle acting through the one-way valve.
Technical Parameters about Phone Covers Making Machine:
| Type | 30T | 50T | 63T |
| Worktable (mm) | 350*350 | 350*400 | 400*400 |
| Power specification | 3 phase 4 wire, 380V | 3 phase 4 wire, 380V | 3 phase 4 wire , 380v |
| Total power (kw) | 14.5 | 16.3 | 16.3 |
| Electrical power (kw) | 3.7 | 5.5 | 5.5 |
| Heating power (kw) | 10.8 | 10.8 | 10.8 |
| Piston diameter (mm) | Φ150 | Φ180 | Φ200 |
| Weight (kw) | 2500 | 3000 | 5000 |
| Size (mm) | 1160*1350*1250 | 1210*1450*1300 | 1360*1610*1400 |
Features of Phone Covers Making Machine:
1. nodular cast iron, has high tensile strengh and toughness after aging carbonization treatment;
2. use Japan NOKU oil seal, abrasion resistance, heat resistance and long service life;
3. use the HRC55-58 vertical post, middle carbon steel treatment hard-chromed treatment, ensure the machine precision;
4. high and low pressure oil pump combination, cooling device for oil circuit system;
5. mator auto shutdown once it delay, make it better protect the oil system, poweer saving at the same time;
6. operate the machine via PLC panel, use 24V circuit accessories, safe and durable.
Application about Phone Covers Making Machine:
This Phone Covers Making Machine is applied for sampling various mobile phone case, shoes material, trademark gifts, coaster, U-disk case and various silicon material products.