Laser Cutting Organic Glass Machine

Description:

This machine has extensive working range, large working area, and adopts personalized auto up-down working table which meets the requirements for processing different area materials and also ensures the best focus and processing effect of different thickness materials. It can also be equipped with rotary device to do fine engraving on wood , bamboo , etc, various non-metal tubular materials.

Techinical Parameters:

Model	CY-E250180C
engraving area	2500x1800
Laser power	80/100W
Laser tube	Operation Instruction of Sealed-off CO2 glass lasers, cooling water, 10600 nm
Laser capabilit control	1~100%manipulating and software setting
Engraving speeds(mm/s)	0~1200mm/s
Resolution ratio	< 0.025mm
Minimum Shaping Character (mm)	Chinese character 2× 2mm, letter 1× 1mm
Engraving Depth	0~20mm(60W) 0~25mm(80W)
Highest scanning precision	0.025mm(1200dpi)
Power supply	AC220V± 10% 50Hz
Operating temperature	0~45℃
Graphic format supported	BMP, JPEG, GIF, TIFF, PCX, PLT, AI, TGA, DXP, etc.
Auxiliary equipments	Exhaust-fans, Air-exhaust pipe
Protective Device	Water-break, Protection, Power-off Protection
Operating humidity	5%~95%
CCD Resolution ratio	1.3x107--3.2x107 PIXELS

Guarantee services and after-sales services:

 

1. Within guarantee period, the quality shall be 12 months counting from the date on which the commodity arrives at the port of destination. Except the damage artificially and Co2 laser tube, we are responsible for offering the fitting free of charge during the guarantee period. The user is kindly requested to send the damaged fittings back by courier with your charge before we send back the alternative fitting parts. After the guarantee of quality period, the parts required repairing or change, if any. Shall be reasonable charged.

2. Factory will give technical guide by E-mail, Fax and Telephone when user

meets some problems on installation, operation, adjusting, maintaining.

3. Factory offer technical supporting to ensure safety using & maintenance

for user:

A. Operation manual for installation, adjusting, operation, maintaining.

B. Quick supplement of key component with reasonable price such as Co2

laser tube, focus lens, reflect lens, power supply.

C. Life-long after-sales service & consulting service to user.

Training to customer:

 

1. We will supply with the machine operation manual in English version for:

installation and operation, including introduction for the composing of equipment,

working principle of equipment, common knowledge of computer, controlling

principle of electric devices, daily maintenance measures of equipment. Personal

demonstration for installation, adjusting of equipment, operation of equipment,

programming of computer are available.

2) User can dispatch representatives to our factory for 2-3days for training.

We are responsible for training them free of charge. While all the charges

including travelling charge and accommodation will be afforded by the user.