Name: 20w LED Supermarket light
Numbers: BR - H2 - HB - 20 w
Specification: 3 pin
Power: 20W,30W,40W,50W,60W
Chip: Epistar, Bridgelux COB 20 w
20w LED FINS HIGHBAY LIGHT, High efficiency, High energy, High dissipation, High environmental protection
Numbers: BR - H2 - HB - 20 w
Specification: 3 pin
Power: 20W,30W,40W,50W,60W
Chip: Epistar, Bridgelux COB 20 w
20w LED FINS HIGHBAY LIGHT, High efficiency, High energy, High dissipation, High environmental protection
Fins radiating advantages:
1, radiating body with 1050 pure aluminum sheet material, heat transfer heat conduction effect is good, the welding button FIN/plug FIN technology, patent technology design.
2, each piece of fins wind hole, patches of to form annular air convection channel, the thinner fin can quickly make body high temperature heat sink with air convection or heat sink and derived
3, fins quantity minimum to 36 piece, and air large contact area and the measured than with power car aluminum process temperature low at least 5 degrees (MR16-3 w), highest can low 15 degrees (PAR38)
4, light body structure light weight, only 30% of the weight of car aluminum - 60%, which reduced the enterprise production. Maintenance costs and reduce the transportation cost of enterprises
5, all the radiator of the structure has applied for several patents protection
6, light body can design diversity, beautiful shape, change flexible, greatly increases the enterprise product line, in order to enhance the overall competitive power
[1]specialty:
[A] Adopting integrated Chip as light source with high lighting efficiency(70`90LM/W) ,high CRI(Ra>80),good quality heat dissipation,low light degradation.
[B]There is build-in dedicated power supply, input voltage: AC90~264V,Power Efficiency:>87%,Power Factor
[A] Adopting integrated Chip as light source with high lighting efficiency(70`90LM/W) ,high CRI(Ra>80),good quality heat dissipation,low light degradation.
[B]There is build-in dedicated power supply, input voltage: AC90~264V,Power Efficiency:>87%,Power Factor
:>0.97,constant voltage, constant current. Over voltage \ over power \ over current protection
, lighting protection.
[C]Good aluminum alloy heat sink with good quality heat dissipation, aluminum alloy equipment
[C]Good aluminum alloy heat sink with good quality heat dissipation, aluminum alloy equipment
box,
high strength, IP 65,small reflector cap for focusing the light, big one for gathering the light,
it achieves an ideal lighting effect.
[D]Can start up within 1-3 seconds, no flicker, anti-jamming, no mercury, energy saving, environment friendly.
[2] Shape Structure
Shell Material: Aluminum Alloy
Shell Color: Black
Weight: 0.7Kg
Size: D240x H310 mm
[D]Can start up within 1-3 seconds, no flicker, anti-jamming, no mercury, energy saving, environment friendly.
[2] Shape Structure
Shell Material: Aluminum Alloy
Shell Color: Black
Weight: 0.7Kg
Size: D240x H310 mm
[3]Parameter
Input Voltage |
AC90~264V
|
Color Rendering Index |
Ra>75
|
Freqency Range |
50~60Hz
|
Beam Angle |
120°
|
Power Factor |
>0.97
|
LED Reduction Rate |
1~3% / 1,000Hrs
|
Power Efficiency |
>87%
|
Color Temperature |
2700~7000K
|
ED Working Voltage |
DC30~36V
|
Working Temperature |
-20℃~+45℃
|
LED Power |
20W
|
IP Grade |
IP62
|
Total Power |
22W
|
Working Life-span |
>50000H
|
Luminous Efficiency |
70~90lm / W
|
Power line |
VDE 3×0.75mm2
|
Connect wire |
Brown→L Blue→N Yellow or Green→G
|
[4]Diagram of degradation for Luminous
1, The data above has been got at a temperature of 25 celsius degree and taking 1000 hours
running by a nonstop way.
2, Degradation of luminous flux of LED lamps depends on environmental conditions. The
2, Degradation of luminous flux of LED lamps depends on environmental conditions. The
higher the temperature, the longer the using time, the faster luminous flux drops.
[5]Photomatric Data
[5]Photomatric Data
[6]Illumination Distance/illuminance/Irradiated Area
[7]Packing specification
Lamp Packing: (L)252×(W) 252×(H) 244mm 1PC/CTN 1Kg
Reflector Packing: (L)572×(W) 572×(H) 314mm 10PCS/CTN 10Kg
[8]Using and installing instructions
A.Installation Procedure
Lamp Packing: (L)252×(W) 252×(H) 244mm 1PC/CTN 1Kg
Reflector Packing: (L)572×(W) 572×(H) 314mm 10PCS/CTN 10Kg
[8]Using and installing instructions
A.Installation Procedure
As Picture No.1 Showed, Install reflector on the heat sink, wrest fixed screws very tightly
As Picture No.2 Showed, Wrest hanger into top cap, wrest lock screw very tightly
As Picture No.3 Showed, Wrest the non skid lock screw to proper position.
As Picture No.4 Showed, Hang the lamp on the installation site,and screw down the non
As Picture No.2 Showed, Wrest hanger into top cap, wrest lock screw very tightly
As Picture No.3 Showed, Wrest the non skid lock screw to proper position.
As Picture No.4 Showed, Hang the lamp on the installation site,and screw down the non
skid lock.
As Picture No.5 Showed, Hang chaining of steel wire on another installation device.
As Picture No.6 Showed, Connect Live Wire/Null Wire/Ground Wire to electric cable
As Picture No.5 Showed, Hang chaining of steel wire on another installation device.
As Picture No.6 Showed, Connect Live Wire/Null Wire/Ground Wire to electric cable
properly and switch on.
Attentions:
1,Only professional electrician can install the lamp, please check the lamp very carefully
Attentions:
1,Only professional electrician can install the lamp, please check the lamp very carefully
before installation
2,Please install the lamp follow up the installation procedure, make sure the screw has
2,Please install the lamp follow up the installation procedure, make sure the screw has
been wrested very tightly, the wires have been connected properly, .Please operate
according to Product Instructions enclosed.
Application scope
Applicable to the supermarket to live lighting, art hall, the market, the supermarket, the fruit shop, supermarket cooked food area, dining table lighting and other occasions.