APS specify an E-gas pedal, who is simulation traditional gas pedal's working and sending electrical signal to ECU.
APS Compared with the traditional throttle, APS can use wire to replace the cable, in throttle there put in a micro motor, motor contral the throttle valve. Electronic accelerator pedal can realize the driver's intentions accurately.
Technical Specifications
1. Fullfill the standard of FMVSS124, SAEJ1843
2\ Ambeint Conditions:
2.1 Operating temperature: -40 to 85
2.2 Operating humidity: Equal or below 95%
2.3 Storage temperature: -40to 85
2.4 Test temperature: 23
3. Contacless Sensor is used
4\ Electrocircuit:
4.1 Voltage supply: DC12V
4.2 Operating electrical current: 30mA(Max)
4.3 signal output: See Figuer 1
4.4 Electrical principle: See Figuer 2
4.5 Signal Test load: 10kΩ C=4.7nF
4.6 Sensor linearity: <2%
4.7 Reverse polarity Voltage Protection: Protect
5\ Electrocircuit connection
5.1 Connection Pinning Description: See Figuer 4
5.2 Matching Connector type; AMP 174262-2
6\ Mechanical Requirement:
6.1 Force signal: See Figuer 3
6.2 Force initiation: 20NEnd force: 35N,
6.3 Fatigue Test: Can endure 10million of full working
Stroke cycles (100 times/min)
Used in agricultural equipment, truck, passenger car, off-highway vehicles, construction equipment and marine applications, applied to the following engines:
Yuchai Engine
Weichai Engine
Dalian engine
Hangzhou engine
Yunnei engine
Shanghai engine
Bosch company
APS Compared with the traditional throttle, APS can use wire to replace the cable, in throttle there put in a micro motor, motor contral the throttle valve. Electronic accelerator pedal can realize the driver's intentions accurately.
Technical Specifications
1. Fullfill the standard of FMVSS124, SAEJ1843
2\ Ambeint Conditions:
2.1 Operating temperature: -40 to 85
2.2 Operating humidity: Equal or below 95%
2.3 Storage temperature: -40to 85
2.4 Test temperature: 23
3. Contacless Sensor is used
4\ Electrocircuit:
4.1 Voltage supply: DC12V
4.2 Operating electrical current: 30mA(Max)
4.3 signal output: See Figuer 1
4.4 Electrical principle: See Figuer 2
4.5 Signal Test load: 10kΩ C=4.7nF
4.6 Sensor linearity: <2%
4.7 Reverse polarity Voltage Protection: Protect
5\ Electrocircuit connection
5.1 Connection Pinning Description: See Figuer 4
5.2 Matching Connector type; AMP 174262-2
6\ Mechanical Requirement:
6.1 Force signal: See Figuer 3
6.2 Force initiation: 20NEnd force: 35N,
6.3 Fatigue Test: Can endure 10million of full working
Stroke cycles (100 times/min)
Used in agricultural equipment, truck, passenger car, off-highway vehicles, construction equipment and marine applications, applied to the following engines:
Yuchai Engine
Weichai Engine
Dalian engine
Hangzhou engine
Yunnei engine
Shanghai engine
Bosch company
If you are interested in our product, please contact me and welcome to visit our factory.