APS specify an E-gas pedal, who is simulation traditional gas pedal's working and sending electrical signal to ECU.
APS Compared with the traditional throttle, APS can use wire to replace the cable, in throttle there put in a micro motor, motor contral the throttle valve. Electronic accelerator pedal can realize the driver's intentions accurately.
 Technical Specifications
1.  Fullfill the standard of FMVSS124,SAEJ1843
2.  Ambeint Conditions:
2.1 Operating temperature:-40 DEG to 85DEG
2.2 Operating humidity:equal or below 95%
2.3 Storage temperature:-40 DEG to 85DEG
2.4 Test temperature:23DEG plus or minus 5 DEG
3.  Contacless Sensor is used
4.  Electrocircuit:
4.1 Voltage supply:DC12Vplus or minus 0.5V
4.2 Operating electrical current:30mA(Max)
4.3 signal output: See Figuer 1
4.4 Electrical principle:See Figuer 2
4.5 Signal Test load:10KΩ C=4.7nF
4.6 Sensor linearity: under 2%
4.7 Reverse polarity Voltage Protection:protect
5.  Electrocircuit connection
5.1 Connection Pinning Description: See Figuer 4
5.2 Matching Connector type;AMP 174262-2
6.  Mechanical Requirement:
6.1 Force signal: See Figuer 3
6.2 Starting force:30%p6N,Ending force 45%p6N,
    Resilience more than 7N
6.3 Fatigue Test: Can endure 10million of full working
    stroke cycles (100 times/min)
7.  wire harness
    XS-JX-032(400mm±20mm)
    XS-JX-032(400mm±20mm) 

Used in agricultural equipment, truck, passenger car, off-highway vehicles, construction equipment and marine applications, applied to the following engines:
Yuchai Engine
Weichai Engine
Dalian engine
Hangzhou engine
Yunnei engine
Shanghai engine
Bosch company

If you are interested in our product, please contact me.