| Place of Origin: | China (Mainland) |
|---|---|
| Brand Name: | Hong Ye silicone rubber |
| Model Number: | |
| Low compression set: | great ability to resist extreme temperatures of heat and cold |
| excellent tear strength: | high transparency |
| non shrinkage: | good resilience |
| anti-yellowing: | Good heat stablity and weatherability |
Quick Details
Specifications
Injection moulding silicone material for silicon baby nipples Typical Properties
Injection moulding silicone rubber is an injection molding liquid silicone rubber, which is an elastomer cured under high temperature, has the following excellent properties:
High transparency
Excellent tear strength(≥35KN/m)
Good resilience
Good heat stability and weatherability ( temperature resistant range of -60°C--250°C)
Anti-yellowing
Heat-ageing resistance
Comply with USA CFR 21.Part.177.2600 and Chapter 4.9 Test Standards for Volatile Compound of EN14350-2 and EU RoHS Standard.
Injection moulding silicone rubber is an injection molding liquid silicone rubber, which is an elastomer cured under high temperature, has the following excellent properties:
High transparency
Excellent tear strength(≥35KN/m)
Good resilience
Good heat stability and weatherability ( temperature resistant range of -60°C--250°C)
Anti-yellowing
Heat-ageing resistance
Comply with USA CFR 21.Part.177.2600 and Chapter 4.9 Test Standards for Volatile Compound of EN14350-2 and EU RoHS Standard.
Injection moulding silicone material Standard Datasheet:
|
Item
|
Q940
|
||||
|
Appearance
|
tansparent
|
||||
|
Viscosity (Pa.S)
|
600
|
||||
|
Density (g/cm3)
|
1.08
|
||||
|
Hardness (A°)
|
40
|
||||
|
Elongation at break (%)
|
550
|
||||
|
Tear strength (KN/m)
|
35
|
||||
|
Curing condition
|
After Mixed A with B according to mixing ratio of 1:1, 150mm×150mm×2mm, mould will be formed in 7 minutes under temperature of 150°C
|
||||
After the component A and component B are mixed under the temperature of 20 °C, the effective operating time is 5 days in sealing status, The effective operating time will shorten in case of rising temperature.
Instruction: Typical data can not be directly used for actual production guidance. Please contact us for details.
Package: The general packages of HY-92XA/B series is in 20kg and 200kg per barrel.
Other applications: The series of products can also be used for producing other food grade silicone rubber products.
Instruction: Typical data can not be directly used for actual production guidance. Please contact us for details.
Package: The general packages of HY-92XA/B series is in 20kg and 200kg per barrel.
Other applications: The series of products can also be used for producing other food grade silicone rubber products.