1. Shoe insole silicone rubber
Shoe mold silicone rubber is mainly used for shoe molds, Shoe insole , sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.
2. Features of Shoe mold silicone rubber
a. Shoe insole , shoe soles mold making
b. Two-component silicone rubber with tin-catalyst
c. Cured under room temperature
d. Low shrinkage
e. Excellent fexibility & easy demould
3. Shoe Mold Silicone Rubber hy218 Standard Datasheet:
Appearance: white
Viscosity(cp): ≤ 15000
Hardness(A): 18± 2
Tensile strength(Mpa) ≥ 1.3
Tear-strength (kn/m) ≥ 5
Elongation break: (%)≥ 300
Curing agent mixed rate(%): 2-3
Operate time(min): 30
Curing time(hours): 2-4
Viscosity(cp): ≤ 15000
Hardness(A): 18± 2
Tensile strength(Mpa) ≥ 1.3
Tear-strength (kn/m) ≥ 5
Elongation break: (%)≥ 300
Curing agent mixed rate(%): 2-3
Operate time(min): 30
Curing time(hours): 2-4
Notes: Mixing ratio, pot life and Demould time in the above table is measured under the room temperature of 25. C, relative humidity of 65% to 70%. The data is only for referfence, mixing ratio should be 2% to 3% modified according to various temperatures. Different colors are available if requested.